Usado robotica en Niigata, Japón

Setting Machine with Fully Automatic Robot Device

• Fabricante: Nakaya

Longitud máxima aceptable de la hoja: 400 x 120 mm (Tipo estándar) 660 x 150 mm (Tipo largo) | Motor para ajuste (motor oriental): 0.04 kW x 2 | Velocidad del motor: 80-100rpm | Motor paso a paso: 0.06 kW x 2 | A...

Impulse Hardening Machine with Fully Automatic Robot Device

• Fabricante: Nakaya

Rf generator: Input power requirements | Maximum input power: 10kVA | Oscillating frequency: 27.12MHz | Frequency stability: Within ±0.005% | Maximum rf output: A) CW mode 5kW B) Pulse mode 5kW C) EXT mode 5kW | ...

NAKAYA Grinding Machine with Fully Automatic Robot Device

• Fabricante: Nakaya

Acceptable max. length of blade: 400mm×150mm×1.5mm (Long Type=660mm) | Acceptable min. length of blade: 150mm×30mm×0.2mm | Production time (japanese standard 265mm saw blade): 240 sec. / 1 piece | Standard cbn gr...

Stress Relieving Machine with Fully Automatic Robot Device

• Fabricante: Nakaya

Burr Removing & Washing Machine with Fully Automatic Robot Device

• Fabricante: Nakaya

Longitud máxima aceptable de la hoja: 400×120mm (Tipo Estándar) 660×150mm (Tipo Largo) | Sistema de eliminación de rebabas y lavado: Agua de Alta Presión | Presión de agua máx.: 250kgf/cm2 (Ajustable) | Almacén:...

NAKAYA Grinding Machine for Uwame (3rd edge) with Fully Automatic Robot Device

• Fabricante: Nakaya

Acceptable max. length of blade: 400mm ×150mm×1.5mm (Long Type=660mm) | Acceptable min. length of blade: 150mm×30mm×0.2mm | Production time (japanese standard 265mm saw blade): 100 sec. / 1 piece | Standard cbn ...

NAKAYA Grinding Machine for R650 Curved Blade with Fully Automatic Robot Device

• Fabricante: Nakaya

Acceptable max. length of blade: 550mm (450mm) ×150mm×1.5mm | Acceptable min. length of blade: 150mm×30mm×0.2mm | Production time (japanese standard 265mm saw blade): 290 sec. / 1 piece | Standard cbn grinding wh...

Taper Grinding Machine with 2-Heads (Double-Sided) for Hand Saw Blade

• Fabricante: Nakaya

Motor: Motor del husillo: 30HP, 4P | Longitud de hoja aceptable: Máx:400mm/Mín:180mm | Almacén: Altura=800mm×2carriles | Medición de la máquina: Longitud: 3.600mm / Ancho: 3.500mm / Altura: 1.800mm | Tiempo de p...