Usado machinery

KVT 55E

Características: KVT 55E | Diámetro máximo de giro: 21.6 | Longitud máxima de giro: 19.7 | Diámetro máximo de vuelco: 29.5 | Nariz del husillo: A2-11

KVR 320X202

Características: KVR 320X202 | Desplazamiento: 60 X 32 X 28 | Velocidad del cabezal: 8000 RPM | Cono del husillo: CT-50 | Tamaño de la mesa: 63 X 28

KLM 200SM

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

KLR 200

Características: KLR 200 | Diámetro máximo de giro: 13.8 | Longitud máxima de giro: 22.4/39.4 | Husillo agujero pasante: 2.44 | Chuck: 8.26

HL 44

Characteristics: HL 44 | I turn over the bench: 44″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 61 ″ | Width of the bed: 24″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″ /240″ /280″ ...

HW 26

Characteristics: HW 26 | I turn over the bench: 26″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 35″ | Width of the bed: 15.75″ | Distance between points: 80″ (O 120″ / 160″) | Cross travel: 14...

ML 2060T

• Taladro del eje: 127 millimeter

Characteristics: ML 2060T | I turn over the bench: 20″ | Turning on the cross slide: 14 " | I turn over the neckline: 27.5″ | Width of the bed: 12 ″ | Distance between points: 57″ | Cross travel: 12 ″ | Auxiliary...

KLS 1760II

Characteristics: KLS 1760II | I turn over the bench: 17″ | Turning on the cross slide: 10.2″ | I turn over the neckline: 22 ″ | Width of the bed: 12 - 1/4″ | Distance between points: 60″ | Cross travel: 9.26″ | A...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...