4042 Series Spectrum Analyzer en Qingdao, Shandong, China
Nuevo
Especificaciones
- Condición
- nuevo
- Número de stock
- Nominal frequency: 10MHzAging rate: ±5×10-7/yearInitial frequency accuracy: ±3×10-7Temperature stability: ±1×10-7 (0℃～+50℃ relative to 25℃±10℃)Frequency reference error:±(to last calibration date × aging rate + temperature stability + calibration accuracy)Note: By default the time until the last calibration is 1 year. This indicator is guaranteed by the crystal oscillator manufacturer.
- Frequency range
- 4042B: 9kHz~9GHz4042D: 9kHz~20GHz
- Sweep time
- Range: 1μs-6000s (zero span)Accuracy: ±1.0% (zero span)
- Frequency readout accuracy
- ±(frequency reading × frequency reference error + 1% × span + 10% × resolution bandwidth)
- Span
- Range: 0Hz (zero sweep width), 10Hz - upper limit of frequency rangeAccuracy: ±1.0%
- Rbw
- Bandwidth range: 1Hz~20MHz (1-2-3-5-8 steps)
- Vbw
- Bandwidth range: 1Hz~20MHz (1-2-3-5-8 steps)
- Ssb phase noise(carrier 1ghz, +15℃~+35℃)
- ≤-108dBc/Hz@10kHz, ≤-110dBc/Hz@100kHz≤-118dBc/Hz@1MHz, ≤-129dBc/Hz@10MHz
- Displayed average noise level(50ω load connected at input, 0db input attenuation, average detector, rbw normalized to 1hz, +15℃~+35℃)
- Preamplifier ON:≤-161dBm(2MHz~2.4GHz), ≤-160dBm(2.4GHz~6GHz),≤-159dBm (6GHz~9GHz), ≤-158dBm (9GHz~14GHz),≤-156dBm (14GHz~20GHz)Preamplifier OFF≤-142dBm(2MHz~2.4GHz), ≤-141dBm(2.4GHz~6GHz),≤-140dBm (6GHz~9GHz), ≤-138dBm (9GHz~14GHz), ≤-138dBm (14GHz~20GHz)
- Second harmonic distortion(attenuation 0db, -30 dbm input, preamplifier off)
- ≤-70dBc (50MHz~10GHz)
- Toi(-15 dbm dual tone signal, 100 khz spacing, 0db attenuation, preamplifier off)
- ≥+13 dBm (50MHz ~ 20GHz)
- Image, multiple and out-of-band responses(-10dbm mixer level)
- <-65dBc (10MHz~7.5GHz), <-60dBc (7.5GHz~10.5GHz),<-65dBc (10.5GHz~20GHz)
- Residual response(50 ω load connected to input port, 0 db input attenuation)
- Preamplifier ON:≤-110dBm (10MHz~3GHz), ≤-105dBm (3GHz~9GHz)≤-103dBm (9GHz~12GHz), ≤-100dBm (12GHz~20GHz)Preamplifier OFF:≤-90dBm (10MHz~20GHz)
- Absolute amplitude accuracy(frequency 10mhz~20ghz, attenuation 10db, 0 dbm~-50 dbm, preamplifier off, rbw 1khz, other parameters automatic)
- ±1.30 dB (working temperature: +15℃~+35℃)
- Input attenuator
- Attenuation range 0dB-30dB, 2dB step
- Maximum input level
- +27dBm CW (input) frequency ≥50 MHz, attenuation ≥ 10dB , preamplifier OFF)
- Reference level
- Range: -150 dBm ~ +30 dBm, min step 1dBConversion error: ±0.50dB (reference level 0 dBm~-60 dBm)
- Detector type
- Normal, PosP, NegP, Smp, Avg, Rms.
- Dimensions
- 377mm (W) ×250mm (H) ×119.5mm (D) (the padding block is closed, without protrusions such as handles, rotary pulse generators and adapters)
- Weight
- ≤6.5kg
- Working temperature
- 0℃~+50℃
- Storage temperature
- -40℃~+70℃
- Electromagnetic compatibility
- Complies with relevant requirements of 3.9.1 in GJB 3947A-2009
- Power supply
- 100~120VAC, 50~60Hz; or 200~240VAC, 50~60Hz
- Power consumption
- ≤55W
- Test interface
- RF input: N-type female connector
- Other interfaces
- 10MHz reference input/output: BNC femaleExternal trigger input interface: BNC femaleGPS antenna interface: SMA female (option, reserved)IF output interface output: BNC female (option)Wi-Fi antenna interface: SMA female (option, reserved)
- Communication and auxiliary interfaces
- Front panel: 1 USB3.0 A-type interface, 1 USB2.0 A-type interfaceRear panel: 2 USB2.0 A-type interfaces, 1 USB3.0 B-type interface (reserved)1 USB 2.0 C-type interface, LAN interface: standard RJ-45 type1 HDMI interface
- Categoría
- Analizadores de señal en China
- Subcategoría
- Signal and spectrum analyzer
- ID de Anuncio
- 103883311
Descripción
The Ceyear 4042 series spectrum analyzer is a new basic spectrum analyzer launched by Ceyear, which covers the frequency measurement range of 9kHz~20GHz. The 4042 series spectrum analyzer adopts portable structure, weighs less than 6.5kg, and has multiple advantages such as wide operating band, excellent performance indicators, fast sweep, multiple testing functions, portability and easy operation.
The 4042 series spectrum analyzer has such measurement function modes as real-time spectrum,interference analyzer,AM/FM/PM analyzer,channel scanner,field strength,power meter,peak-power meter,IQ analyzer, phase noise meter,vector signal analyzer, as well as such intelligent measurement functions as channel power, OBW, ACPR, emission mask, C/N, harmonics and spur emissions, and supports such digital interfaces as LAN, USB and HDMI. The 12.