POWER MEASUREMENT MODULE M7103 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Compatible models
- Data Logger LR8101: Standard model Data Logger LR8102: Advanced model
- Operating temperature and humidity range
- 0°C to 40°C (32°F to 104°F), 80% RH or less (non-condensing)
- Measurement lines
- 1-phase/2-wire (1P2W) 1-phase/3-wire (1P3W) 3-phase/3-wire (3P3W2M, 3V3A, 3P3W3M) 3-phase/4-wire (3P4W)
- Number of power channels
- 3
- Input terminal
- Voltage: plug-in terminals (safety terminals) Current: dedicated connectors (ME15W)
- Input type
- Voltage: isolated input, resistive potential divider Current: isolated input via current sensors (voltage output)
- Voltage ranges
- 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V
- Current ranges
- 0.04 A range to 20 kA range (depends on the current sensor in use)
- Crest factor
- 3 (relative to voltage and current range ratings), but 1.35 for 1500 V range
- Input resistance, input capacitance
- Voltage inputs: 3 MΩ±30 kΩ, 1.5 pF typical Current sensor inputs: 1 MΩ±50 kΩ
- Maximum input voltage
- Voltage inputs: 1000 V AC, 2000 V DC Current sensor inputs: 8 V, ±12 V peak
- Maximum rated terminal-to-ground voltage
- 1000 V AC/DC, measurement category III, anticipated transient overvoltage 8000 V 1000 V AC / 1500 V DC, measurement category II, anticipated transient overvoltage 8000 V
- Measurement method
- Simultaneous voltage and current digital sampling with zero-cross synchronized calculations
- Sampling
- 500 kHz, 16 bits
- Frequency band
- DC, 0.1 Hz to 100 kHz
- Effective measurement range
- 1% of range to 110% of range
- Lpf (low pass filter)
- Select from OFF/500 Hz/5 kHz
- Measurement parameters
- Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power actor (λ), phase angle (φ), voltage frequency (fU), current frequency (fI), voltage ripple ratio (Urf), current ripple ratio (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
- Other measurements
- Frequency, integration, harmonic (IEC measurement mode, wide-band measurement mode)
- Functions
- AUTO range, calculation, synchronization source sharing
- Dimensions and weight
- Approx. 65W × 170H × 255D mm (2.6W × 6.7H × 10.0D in.) (excluding protruding parts) Approx. 1.5 kg (3.3 lbs)
- Included accessory
- Instruction Manual ×1
- Subcategoría
- Multichannel data loggers
- ID de Anuncio
- 104225720
Descripción
Introducing the M7103, a power measurement module that boasts power analyzer class accuracy. This product delivers exceptional scalability, high-speed data recording, and unparalleled stability in multi-channel power efficiency measurement. It is the optimal choice for embedded applications, offering valuable solutions for all your data recording needs.
Power analyzer class accuracy, DC/AC ±0.07%
1500 V DC accuracy guarantee
Up to 12 channels in a 4U unit that fits in a 19-inch rack
Up to 120 channels (10 sets of 12 channels)
Synchronization Source Sharing function for more stable efficiency measurement
Manufacturers are developing PV inverters that operate at higher voltages to reduce equipment costs and transmission losses. As a result, measurement of PV inverters requires instruments that can accommodate high voltages.
The M7103 supports 1500 V DC CAT II and 1000 V DC CAT III measurement, allowing high voltages to be input directly and measured safely.