Single-stage corrugated iron rolling machine - Square wave en Ho Chi Minh City, Vietnam
Usado
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- usado
- Dimensions (d x r x c)
- 10500 mm x 1700 mm x 1400 mm The length of the machine can be changed from ± (0.4 m ÷ 1.6 m) according to the waveform (Number of shaft pairs increases or decreases)
- Weight / kg)
- 8000 Kg ~ 9000 Kg (Machine weight may vary according to profile and number of shaft pairs)
- Productivity / speed (m / p)
- 18 22 m/min (Or faster depending on requirements)
- Chassis
- I # 396
- Machine wall (mm)
- 20 mm
- Cutting board
- High-strength Q345 steel 36 mm => 40 mm anti-vibration, curved, ensures the cutter does not warp scratches during use
- Roller diameter (mm)
- Ø70 mm
- Electric power (kw / hp)
- 5.5 KW / 7.5 HP
- 05 square waves
- 18 pairs - 20 pairs
- 06 square waves
- 18 pairs - 20 pairs
- 07 square waves
- 22 pairs
- 09 square waves
- 22 pairs
- 11 square waves
- 22 pairs
- Thickness (mm)
- 0.25 mm ÷ 0.6 mm
- Width of corrugated iron (mm)
- 1200 mm
- Stiffness
- G300 - G550
- Electric motor (hp)
- 7.5 HP Hitachi/Teco - Japan/Taiwan
- Pump head (cm³ / v)
- 31 Cm³ / v
- Valve
- 2-speed valve
- Cooling (fan)
- AH1012 (100 l/min)
- Oil pipe
- Yokohama / Dynesflex
- Drive motor (cc / v)
- BMS - 400 cc/v
- Pressure gauge (kg / cm²)
- 250 Kg / cm² (Japan)
- Hydraulic oil r32 (imported)
- 200L
- Cb source
- Fuji - Mitsu
- Relay against motor overload
- Have
- The source board
- 24VDC Omron - Japan
- Industrial controller (plc)
- Mitsubishi - Japan
- Screen
- 7 inch - Weintek - Taiwan
- Relay shut off hydraulic valve
- 10A Idec - Japan . Super durable switching contact
- Bo rate control speed
- Are not
- Control cabinet
- Hanging cabinets save space
- Counter
- Autonics - Korea (360 pulses /rev)
- Sirens
- 250VAC
- Lights
- 250VAC
- Wire
- Vietnam
- Flat cutting knife
- Ø80 x 150 ST
- Shape knife
- Ø80 x 150 ST
- Chain rs
- 60
- Button
- Super durable dustproof for more than 5 years (Idec - Japan)
- Cutter
- Japanese / German special steel, knife durable over 5 years. (Use correct maintenance techniques according to the supplier's instructions)
- Rolling batch
- Chromium
- Need electrical cabinets
- paint
- Rolling brace (ø88 - ø112)
- paint
- Soup tube (ø76)
- paint
- Ty
- paint
- Yoke
- paint
- Front / rear roller
- Galvanized
- Front mask
- Galvanized
- Chain cover
- Painted steel
- Durability & machine uniformity
- The machine's equipment is manufactured in series from Japanese CNC lathes, milling, grinding, cutting machines and new automatic welding robot, imported 100% new ABB - Switzerland, Yaskawa.
- Safe in use
- The machine is programmed to automatically disconnect the valve when the trip limit switch failure occurs to ensure no mechanical damage or hydraulic seal tank, with emergency buttons both before and after to use. handling.
- Productivity and product quality
- Designing standards across many machines, coordinating with quality standards between machine manufacturers and customers using machines, surveying the reality of the works in use, so there is an optimal solution for each product. The sharp lamination lines do not get scratches, black marks when cold rolled iron like products of other suppliers.
- Meet technical standards
- Closely inspecting and evaluating each stage of machine manufacture, always improving quality.
- Design upon request
- This is a standard product (can be designed when there are specific requirements of customers).
- Categoría
- Procesamiento en Vietnam
- Subcategoría
- Factory plant
- ID de Anuncio
- 52697513
Descripción
When designing a square corrugated iron roll forming machine, technical staff must ensure the following criteria in order for the machine to operate smoothly and safely:
1. The machine must work for the highest efficiency and productivity, ensure the best roofing quality, the least waste.
2. The cold-rolled square corrugated iron rolling machine must have high rigidity and good gloss.
3. The number of waves on a commonly used corrugated board is: 9 square wave corrugated iron or 11 square wave corrugated iron (Depending on the needs of the customer, you can choose more types of corrugated iron 5 square wave, 6 square wave, ...)
4. Create a corrugated iron shape that causes little error in shape and size, without tearing or breaking
5. The machine works stably: The quality of the finished product after rolling between the first and the 1000th corrugated board is uniform (For bulk rolling)
1. The roof does not open the joints between the two panels when viewed from the bottom up, top down.
2. The machine is machined and assembled accurately to ensure parallelism between the axes and the cutter to ensure no aliasing when roofing.
3. Memory stores 10 orders running automatically throughout the process.
4.