Three-axis rail high-speed and high-accuracy machining central machine en Suzhou, Jiangsu, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Basic specification
- unit CV-850
- Strokes of axes x, y and z
- mm 800×500×500
- Nose of the spindle to the table surface
- mm 120-620
- Center of the spindle to the shield surface of axis z
- mm 520
- Table size
- mm 1000×500
- Maximum load of the table
- kg 700
- Size of t-shaped slot (width * number of slots * interval)
- mm 18×5×90
- Revolving speed of spindle
- rpm 10000
- Horsepower of spindle motor
- kw 11
- Taper of spindle
- BT-40
- Diameter of spindle
- mm 150
- Maximum feed rates of axes x, y and z
- m/min 48×48×48/36×36×36
- Repeated accuracy
- mm ±0.003
- Positioning accuracy
- mm ±0.005
- Form of tool changer
- Knife arm
- Capacity of the tool magazine
- support 24
- Maximum tool diameter
- mm 80/150
- Maximum tool length
- mm 300
- Maximum tool weight
- kg 8
- Tool changing time (t-t)
- sec 1.8
- Pressure of air machine
- kgf/cm2 7
- Power demand
- KVA 20
- Net weight
- T 5.3
- Overall size (length * width*height)
- m 2.55×2.2×2.6
- Categoría
- Centros de mecanizado en China
- Subcategoría
- Vertical processing series
- ID de Anuncio
- 55956220
Descripción
Advantages of the product
The heavy-duty roller type guide rails of Taiwan or German brand, and Taiwan spindle with an external diameter of 150mm are applied to the three axes; the product can effectively cool the spindle that runs at high speed in connection with Tongfei oil cooler which is shared with the Beijing Jingdiao CNC machine tool, thereby improving the service life of the spindle and reducing thermal elongation due to temperature rise of the spindle; and accordingly the machining accuracy is improved.
The tool magazine is designed as the fully-sealed structure which can effectively prevent the spattering iron scraps from adhesion to the tool magazine; therefore, fault of the tool magazine is greatly reduced, and the fragments generated by the spindle are discharged. In this way, the cost is increased, while many manufacturers are reluctant to increase; however we will never cut down materials!
Introduction of structure of the machine tool body