MEMORY HiCORDER MR8740T en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Number of input units
- Max. 27 slots
- Number of channels
- [Using the U8975] Max. 108 ch analog, or 96 ch analog + 48 ch logic (when used in combination with U8975 + 8973) [Using the 8966] Max. 54 ch analog, or 48 ch analog + 48 ch logic (when used in combination with 8966 + 8973) *Logic unit 8973 is limited to slots 25 to 27, up to 3 units. *Analog unit channels are isolated from each other and from chassis. Logic unit channels share a common GND with chassis.
- Measurement ranges
- 100 mV to 400 V f.s., 12 ranges, resolution : 1/2000 of range (when using 8966) 4 V to 200 V f.s., 6 ranges, resolution : 1/32000 of range (when using U8975) 100 mV to 1000 V f.s., 5 ranges, resolution : 1/1000 000 of range (when using MR8990) 1 V, 10 V, 100 V f.s., 3 ranges, resolution : 1/1000 000 of range (when using U8991)
- Max. allowable input
- 1000 V DC/700 V AC (when using the U8974), 400 V DC (when using the 8966), 200 V DC (when using the U8975), 40 V DC (when using the U8978)
- Frequency characteristics
- DC to 5 MHz (-3 dB, when using 8966)
- Max. sampling speed
- 20 MS/s, all ch simultaneous, external sampling: 10 MS/s
- Measurement functions
- Memory (high-speed recording)
- Memory capacity
- Total of 1 G Word installed, 16 MW/ch (when using 8966), 8 MW/ch (when using U8975 or MR8990), 4 MW/ch (when using U8991)
- Internal storage
- SSD 480 GB
- Removable storage
- USB memory stick ×8
- Monitor output
- VGA, HDMI, Display Port, Recommended resolution 1920 × 1080 dot or more
- External interfaces
- [LAN] 1000 BASE-T, 100 BASE-TX, 10 BASE-TX (2 port) (DHCP and DNS support, FTP server/cliant, HTTP server) [USB] USB 3.0 Series A receptacle × 4, USB 2.0 ×4
- Power supply
- 100 to 240 V AC, 50/60 Hz (400 VA max.)
- Dimensions and mass
- 426 mm (16.77 in)W × 177 mm (6.97 in)H × 505 mm (19.88 in)D, 14.0 kg (493.8 oz) (main unit only)
- Included accessories
- Power cord ×1,Quick Start Manual (booklet) ×1, Instruction Manual (detailed edition) (CD-R) ×1, application disk (CD-R) ×1, blank panel (blank slot only), rack installation hardware
- Categoría
- Equipo analítico general en Japón
- Subcategoría
- Data acquisition (daq) for r&d and testing applications
- ID de Anuncio
- 61137816
Descripción
The MR8740T (MR8740-50) is rack-mountable data acquisition system that delivers high-speed, multi-channel measurements over maximum of 108 channels. Generate simulated signals and record at the same time using plug-and-play input units, making the waveform recorder ideal for evaluating multi-signal devices such as vehicle electronic control units (ECU).
Ideal for multipoint inspection of high performance boards such as ECU
108ch analog to 96ch analog + 48ch logic input
Reduce time required to save to external media to max.1/100 compared with conventional method
20 MS/s simultaneous sampling on all channels
Safe measurement with all analog inputs isolated
Supports 4K monitor to display multi-channel waveforms without overlapping
Measure 4 channels with 1 unit (4 ch analog Unit U8975, 4 ch DVM Unit U8991)
Generate constant voltage, constant current, and simulated resistance (VIR Generator Unit U8794)
ECUs are connected to a large number and wide variety of sensors.