SWITCH MAINFRAME SW1002 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Slots
- 12 slots
- Supported modules
- MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair)
- Connectible instruments
- Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-terminal pair × 1
- Max. input voltage
- 60 V DC (Cannot connect to battery packs in excess of 60 V DC), 30 V AC rms, 42.4 V peak, Maximum rated voltage to ground: 60 V DC
- Communication i/f
- LAN, USB, RS-232C (for host, for measurement instruments)
- Functions
- Channel switching, wiring method, scan function, communication command transmission, channel delay, shield switching
- Power supply
- 100 to 240 V AC / 30 VA (50/60 Hz)
- Dimensions and mass
- 25.5 mm (1.00 in) W × 110 mm (4.33 in) H × 257 mm (10.12 in) D, 210 g (7.4 oz)
- Included accessories
- Instruction manual ×1
- Wiring method
- 2-wire or 4-wire
- No. of channels
- 22 channels (2-wire) / 11 channels (4-wire)
- Contact method
- Armature relays
- Channel switching time
- 11 ms (excluding measurement time)
- Max. allowable voltage
- 60 V DC, 30 V AC rms, 42.4 V peak
- Max. allowable current
- 1 A DC, 1 A AC rms
- Max. allowable power
- 30 W (resistive load)
- Maximum rated voltage to ground
- 60 V DC
- Subcategoría
- Battery testers
- ID de Anuncio
- 61137897
Descripción
The SW1002 is a switch mainframe for housing the SW9001 or SW9002 Multiplexer Module to deliver quick, multi-channel battery testing. Connect up to 2 battery testing instruments to test OCV measurement, internal resistance measurement, and external potential measurement of battery cells.
Switch between voltmeter and battery tester while testing
SW1002: max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)
Circuit-design-friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s. [*1])
For OCV measurement, internal resistance measurement, and external potential measurement of battery cells
Measure battery modules up to 60 V DC
*1:
For BT4560 100 mΩ range, R measurements, and a measurement frequency of 1 kHz
Combine the SW1002 with a battery testing instrument to measure a battery cell's OCV (open circuit voltage), internal resistance, reaction resistance at low frequency, Cole-Cole plot, and external potential on multiple channels.