AC/DC CURRENT SENSOR CT7631 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated measurement current
- 100 A AC/DC
- Max. measurement current
- 100 A (requires derating at frequency))
- Max. allowable peak input
- 150 A peak
- Bandwidth
- DC to 10 kHz (-3dB) (When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
- Typical phase accuracy
- ±1.8 deg (DC < f ≤ 66 Hz)
- Output rate
- 1 mV/A
- Max. rated voltage to earth
- AC/DC 600 V (CAT IV)
- Core diameter
- φ 33 mm (1.30 in) or less
- Output connectors
- HIOKI PL 14
- Operating temperature range
- -25°C to 65°C (-13°F to 149°F)
- Dimensions and mass
- 58 mm (2.28 in)W × 132 mm (5.20 in)H × 18mm (0.71 in)D, 250 g (8.8 oz), Cable length 2.5 m (8.20 ft)
- Included accessories
- None
- Categoría
- Sensores en Japón
- Subcategoría
- Ac/dc current sensors, dc to 20 khz
- ID de Anuncio
- 61137970
Descripción
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7631 is a 100 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. Mix and match with other sensors in the series for a cost-effective solution covering a broad measurement range.
CAT IV 600 V
Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments
Ideal for site inspections by using detachable Display Unit
Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output: