AC/DC AUTO-ZERO CURRENT SENSOR CT7736 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated measurement current
- 600 A AC/DC
- Max. measurement current
- 600 A (requires derating at frequency)
- Max. allowable peak input
- 900 A peak
- Bandwidth
- DC to 5 kHz (-3dB) (When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
- Typical phase accuracy
- ±1.8 deg. (DC < f ≤ 66 Hz)
- Output rate
- 1 mV/A
- Max. rated voltage to earth
- AC/DC 600 V (CAT IV) AC/DC 1000 V (CAT III)
- Core diameter
- φ 33 mm (1.30 in) or less
- Output connectors
- HIOKI PL 14
- Operating temperature range
- -25 °C to 65 °C (-13 °F to 149 °F)
- Dimensions and mass
- 64 mm (2.52 in)W × 160 mm (6.30 in)H × 34 mm (1.34 in)D, 320 g (11.3 oz), Cable length 2.5 m (8.20 ft)
- Included accessories
- None
- Categoría
- Sensores en Japón
- Subcategoría
- Ac/dc current sensors, dc to 20 khz
- ID de Anuncio
- 61137971
Descripción
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7736 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing.
Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger.
CAT IV 600 V
Accurately measure and record even when the temperature changes
Ideal for site inspections by using detachable Display Unit
Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output: