CLAMP ON SENSOR 9695-02 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated measurement current
- 50 A AC
- Max. measurement current
- Continuous 60 A (45 to 66 Hz)
- Output rate
- 10 mV AC/ A
- Amplitude accuracy (45 to 66 hz)
- ±0.3 % rdg. ±0.02 % f.s. (*1)
- Phase accuracy
- ±2° (45 Hz to 5 kHz)
- Amplitude frequency characteristics
- Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
- Max. rated voltage to earth
- 300 V AC rms or less (Insulated conductor)
- Measurable conductor diameter
- φ 15 mm (0.59 in) or less
- Operating temperature and humidity
- 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
- Dimensions and mass
- 50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz) Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter) Option: Connection cable 9219 (3 m, 9.84 ft length)
- Categoría
- Sensores en Japón
- Subcategoría
- Ac current sensors, up to 50 khz
- ID de Anuncio
- 61137981
Descripción
Insulated conductor
Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50 A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
High ±0.3% accuracy
For inverter devices or commercial power lines
For power meters and power loggers (may require the 9219)
Fits in narrow spaces due to compact design
¿Le interesa esta máquina?
Este vendedor fue contactado 1 vez durante la semana anterior.