AC/DC CURRENT SENSOR CT6872 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated current
- 50 A AC/DC
- Max. allowable input
- Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less
- Frequency bandwidth
- Amplitude: DC to 10 MHz Phase: DC to 1 MHz
- Basic accuracy
- DC (±0.03% rdg. ±0.002% f.s., no phase specification) 45 Hz ≤ f ≤ 66 Hz (±0.03% rdg. ±0.007% f.s., ±0.05°) Specified up to 1 MHz
- Output voltage rate
- 40 mV/A rated (This device outputs AC+DC voltage via the Sensor Unit)
- Max. rated voltage to earth
- 1000 V CAT III
- Core diameter
- φ 24 mm (0.94 in)
- Operating temperature, humidity
- -40°C to +85°C (-40°F to 185°F), 80% RH or less (with no condensation)
- Power supply
- Power suppled via the Power Analyzer PW8001, PW6001, PW3390, Sensor Unit CT9555, CT9556, CT9557, or 3CH CURRENT UNIT U8977
- Max. rated power
- 4 VA max. (at 50 A/55 Hz, ±12 V power requirement)
- Dimensions and mass
- 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, CT6872: 370 g (13.1 oz), cable length: 3 m (9.84 ft), CT6872-01: 690g (24.3 oz), cable length 10 m (32.81 ft)
- Included accessories
- Instruction Manual ×1, Mark bands ×6, Operating Precautions ×1
- Compatible models
- CT6872
- Power analyzer pw8001, pw6001, pw3390
- OK
- Power analyzer 3390
- Attention (Requires CT9901)
- Power hitester 3193 series
- Attention (Requires CT9901)
- Current unit 8971
- Attention (Requires the 9318, CT9901)
- 3ch current unit u8977
- OK
- Categoría
- Multímetros en Japón
- Subcategoría
- High accuracy pass-through
- ID de Anuncio
- 64598554
Descripción
Hioki's pass-through type AC/DC current sensors can be connected directly to Hioki Power Analyzers and Memory HiCorders. Also, it can be connected to Power Meters, Oscilloscopes, DMMs, etc. by using an optional sensor unit.
The CT6872 has a frequency bandwidth of DC to 10 MHz and a rated current of 50 A. It is used for R&D, quality evaluation, manufacturing, and maintenance in markets such as wireless charging systems, inverter motors for industrial equipment, power conditioners for PV, and quick charging facilities for EVs.
Use with an instrument with a high input impedance of 1 MΩ or higher.
Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual.
Wide-bandwidth DC to 10 MHz excellent frequency characteristics
Applications in the fields of electric and hybrid electric vehicles
Wide operating temperature range(-40°C to 85°C) fit for automobile applications