wire compcating machine with thickness control and pressure sensor en Cantón, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Application
- section area <=75 sqmm enamel litz wire and related crimp lug.
- 1, input power
- 3*380V 50-60Hz
- 2, air source
- 0.6 Mpa >=19L/min
- 3, welding temperature
- 600C
- 4, program number
- 60
- 5, diameter of electrode
- 6-35mm(outer size)
- 6, max power
- 65 kva (50% duty cycle)
- 7, working temperature
- 10-40C
- 8, welding force
- max 1000kg.
- 9, welding time
- 3-20S.
- 10, dimension
- 800*800*1750H mm.
- Suggested optionals
- water chiller, fume absorber, lifting table etc.
- Categoría
- Equipo de soldadura en China
- Subcategoría
- Fine resistance welding
- Subcategoría 2
- Wire compacting machine and hot crimp machine
- ID de Anuncio
- 65535610
Descripción
Principle:
First, the current goes through the lug, By
the heat generated from the lug, the enamel on the wire has been melt and
removed, and under the heat and pressure, the wire and lug has been compacted and crimped, so we get good
electrical connection between the wires and the crimp lug.
As this need not operator remove the
enamel by mechanical or chemical method before compacting, but do it directly
at one time, this take good advance efficiency and quality.
Specification:
Operation process:
1, put the lug with wire
(fixture if needed) to the welding area.
2, manually align the lug
to the electrode.
3, push the foot switch,
the upper electrode goes down to lock the lug, we can check the position right
or not.
4, push the start button,
the machine will start welding.
5, after weld, the upper
electrode goes back. then repeat from 1.
Lug customize survice
provided:
As our experience,
sometimes, it is very hard in the market to find a lug to match the wire