Sonifex RB-VHDA2x4 3G/HD/SD-SDI 2 Input, 8 Output Video Distribution Amplifier en Londres, Inglaterra, Reino Unido
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- RB-VHDA2X4
- Compatible standards
- SMPTE-424M (3G) / SMPTE-292M (HD-SDI) SMPTE-259M-AC1 (SD-SDI) / SMPTE 344M /DVB-ASI at 270Mb/s1. Other rates will be passed without reclocking.
- Impedance
- 75Ω terminating
- Equalisation
- Up to 100m of Belden 1694A at 1.485Gbps . Up to 350m of Belden 1694A at 270 Mbps
- Data rates
- 143, 270, 1483.5,
- Fully supported passed but not reclocked
- 1485, 2967 & 2970Mbps 177, 360 & 540Mbps
- Reclocking & equalisation
- Automatic
- Resolution
- Automatic
- Return loss
- ＞15dB at 1500MHz
- Output jitter
- ＜0.2UI
- Signal level
- 800mV ±10%
- Power led
- Red indicates power is present
- Input status 1 & 2 leds
- Green indicates signal is present, flashing red indicates signal ismissing.
- 3g/hd/sd-sdi video input
- 2 x BNC (Unbalanced)
- 3g/hd/sd-sdi video outputs
- 8 x BNC (Unbalanced)
- Ethernet port
- RJ45 with status LEDs
- Power supply
- AC: Filtered IEC, continuously rated 85-264VAC, 47-63Hz, fused, max 10W
- Fuse rating:dc
- Anti-surge fuse 1A 20 x 5mm 12V 300mA max, DC supply, 2.5mm socket fused
- Rb-vhda2x4
- 3G/HD/SD-SDI 2 inputs, 8 output video distribution amplifier
- Dimensions (raw)
- 48cm (W) x 10.8cm (D) x 4.3cm (H) 19” (W) x 4.3” (D) x 1.7” (H) (1U)
- Dimensions (boxed)
- 58.5cm (W) x 22.5cm (D) x 7cm (H)23” (W) x 8.9” (D) x 2.8” (H)
- Weight
- Nett: 1.3kg Gross: 1.9kg / Nett: 2.9lbs Gross: 4.2lbs
- Categoría
- Amplificadores en Reino Unido
- Subcategoría
- Video
- Subcategoría 2
- Studio
- Subcategoría 3
- Routing & distribution
- Subcategoría 4
- Sync generators & distribution amps
- ID de Anuncio
- 79409672
Descripción
3G/HD/SD-SDI 2 Input, 8 Output Video Distribution Amplifier
The RB-VHDA2x4 is a high performance, reliable dual input and eight output digital video distribution amplifier for re-clocking and distributing up to two 3G, HD (high definition) or SD (standard definition) SDI sources.
By default, the RB-VHDA2x4 acts as two independent video distribution amplifiers, with input 1 routed to outputs 1-4 and input 2 routed to outputs 5-8. Either input can also be routed to all outputs if desired which can be selected by the Input Select switch on the front panel or via the built-in webserver. The webserver also provides status information for the unit.
The unit provides automatic input detection, re-clocking and cable equalisation of the input signals to 100/350 meters (HD/SD) of coax cable.
The full range of 3G, SD and HD standards are supported by the unit allowing PAL and NTSC signals up to 1080p 60Hz to be distributed.
$1,353 USD