4051 Series Signal and Spectrum Analyzer en Qingdao, Shandong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- Frequency accuracy: ± (last calibration date × aging rate ＋ temperature stability ＋ calibration accuracy)Aging rate: ± 1´10-7/yearTemperature stability: ± 1.5´10-8 (20°C ~ 30°C) ± 5´10-8 (0°C ~ 55°C) Calibration accuracy: ± 4 ´10-8
- Frequency range
- Preamplifier on/off; Preamplifier on/off (typical)
- Rf analyzsis bandwidth
- 1GHz
- Ssb phase noise（10ghz carrier@10khz offset）
- -125dBc/Hz
- Frequency readout accuracy
- ± (frequency readout × frequency reference accuracy＋0.1% frequency band＋5% resolution bandwidth＋2Hz＋0.5 horizontal resolution*) *: horizontal resolution = span/ (sweep points number – 1)
- Frequency counting accuracy
- ± (frequency readout × frequency reference accuracy＋0.1Hz）
- Span
- Range:0Hz (zero span), 10Hz～the highest frequency of the model Accuracy: ± (0.1%× span＋span/ (sweep points number-1))
- Sweep time range
- span≥10Hz: 1ms～6000sspan=0Hz: 1us～6000s
- Resolution bandwidth
- Range: 1Hz～3MHz (1, 2, 3, 5 steps) 4, 5, 6, 8, 10, 20MHzConversion uncertainty: ± 0.3dB 1Hz～10MHz± 1.0dB 20MHz
- Video bandwidth
- 1Hz～3MHz (1, 2, 3, 5 steps) 4, 5, 6, 8, 10, 20MHz (rated value)
- Signal analysis bandwidth
- 10Hz～10MHz (standard), 40MHz (option H38A), 200MHz (option H38B), 550MHz(option H38C), 1GHz(option H38D)
- Memory
- 4GB
- Trigger source
- Free, Line, video, external level (front panel), external level (back panel), burst RF, timer
- Trace detector
- Normal, positive peak, negative peak, sample, video average, power average, voltage average
- Ssb phase noise （1ghz carrier，20°c ~ 30°c)
- Frequency offset; Feature; Typical
- 100hz
- -96dBc/Hz; -105dBc/Hz
- 1khz
- -115dBc/Hz; -118dBc/Hz
- 10khz
- -125dBc/Hz; -129dBc/Hz
- 100khz
- -125dBc/Hz; -129dBc/Hz
- Residual fm (central frequency 1 ghz, resolution bandwidth 10hz, video bandwidth 10hz)
- ≤(0.25 Hz x N) p-p，the rated value within 20msN is the number of frequency multiple times of LO
- Displayed average noise level (the input end is connected to match load, sample or average wave detection, the average type is logarithm, 0dbinput attenuation, rf gain takes the danl as the priority, 20°c ~ 30°c)
- 4051A/B/C/D/E/F/G/H
- 10mhz～1ghz
- -162dBm; -164dBm
- 1ghz～2ghz
- -162dBm; -165dBm
- 2ghz～3ghz
- -160dBm; -164dBm
- 3ghz～3.6ghz
- -156dBm; -163dBm
- 3.6ghz～4ghz
- ±1.5dB/±1.8dB; ±1.0dB/±1.2dB
- 4ghz～5ghz
- -155dBm; -164dBm
- 5ghz～9ghz
- -155dBm; -164dBm
- 9ghz～18ghz
- +13dBm; +15dBm
- 18ghz～26.5ghz
- ±3.0dB/±3.5dB; ±1.6dB/±1.8dB
- 26.5ghz～40ghz
- ±3.5dB/±4.0dB; ±2.2dB/±2.3dB
- 40ghz～50ghz
- ±3.0dB; ±2.0dB
- 50ghz～67ghz
- +9dBm; +11dBm
- 67ghz～72ghz
- -124dBm; -128dBm
- 72ghz～85ghz
- -131dBm; -135dBm
- Frequency response & absolute amplitude accuracy (10db attenuation,20°c ~ 30°c)
- Frequency range; Feature; Typical
- 3hz～20mhz
- ±1.2dB/±1.5dB; ±0.6dB/±0.6dB
- 20mhz～2ghz
- ±1.0dB/±1.5dB; ±0.6dB/±0.8dB
- 2ghz～3.6ghz
- ±1.2dB/±1.5dB; ±0.6dB/±0.9dB
- 4ghz～9ghz
- +11dBm; +15dBm
- 67ghz～85ghz
- +9dBm; +11dBm
- 40ghz～67ghz
- ±3.5dB/±4.0dB; ±2.4dB/±2.6dB
- 1db gain compression (mixer level, dual-tone test, resolution bandwidth is 5khz, 3mhz frequency interval, 20°c ~ 30°c)
- Frequency range; Feature
- 20mhz～40mhz
- -3dBm
- 40mhz～200mhz
- +1dBm
- 200mhz～4ghz
- +13dBm; +16dBm
- 9ghz～50ghz
- +1dBm
- 50ghz～85ghz
- -1dBm
- Toi distortion (input mixer 2 -10dbm signal test, frequency interval is 50khz，20℃～30℃）
- Frequency range; Feature; Typical
- 10mhz～200mhz
- +13dBm; +15dBm
- 18ghz～50ghz(l type)
- +13dBm; +17dBm
- Residual response (the input end is connected to match load, 0db attenuation)
- -100dBm 200kHz～9GHz-100dBm (rated value) other frequency
- Dimensions
- W×H×D= 510mm×190mm×534mm (including handle, foot-pad, bottom feet)W×H×D= 426mm×177mm×460mm (excluding handle, foot-pad, bottom feet)
- Weight
- About 25kg (different configuration cause different weight)
- Power supply
- Standard： AC 220~240V: 50~60Hz 4051-H98：AC 100~240V：50~60Hz
- Power consumption
- Standby: less than 20W; operating: less than 400W
- Temperature range
- Operating temperature: 0°C ~ +50°C; storage temperature: -40°C ~ +70°C
- Input connector
- 4051A/B/C/D: type N (female), impedance: 50Ω4051E: 3.5mm (male), impedance: 50Ω4051F/4051G/4051H: 2.4mm (male), impedance: 50Ω4051L: 1.85mm (male), impedance: 50Ω4051N: 1.0mm (male), impedance: 50Ω
- Categoría
- Analizadores de señal en China
- Subcategoría
- Signal and spectrum analyzer
- ID de Anuncio
- 79681721
Descripción
4051 series signal/spectrum analyzer, as high-performance flagship product, has excellent performance in dynamic range, phase noise, amplitude accuracy, and measurement speed. 4051 series has various measurement functions including: high-sensitivity spectrum Analyzer, standard power measurement components, IQ Analyzer, Vector Signal Analyzer, Real-Time Spectrum Analyzer, Transient Analyzer, Pulse Signal Analyzer, Audio Analyzer, Analog Demodulation measurement, and Phase Noise measurement, Noise Figure, etc., which can provide you reliable high-performance measurement service. 4051 series have good extension capacity. Its performance can be further improved by flexible configuration of different options. Through various digital and analog signal output interfaces, the spectrum analyzer can be taken to establish measurement systems or get secondary development. It can be widely used for signal and equipment measurement in field of communication.