3656 Series Vector Network Analyzer en Qingdao, Shandong, China

Especificaciones

Condición
nuevo
Número de stock
Setting range:±500dBSetting resolution:0.001dB
Parameters
3656D
Frequency range
300kHz-20GHz
Frequency resolution
1Hz
Frequency accuracy
±1×10-6(23℃±3℃)
System dynamic range
(10Hz) (3kHz)100kHz-1MHz 90dB 60dB1MHz-10MHz 110 dB 80 dB10MHz-3GHz 125dB 95dB; (10Hz) (3kHz)100kHz-20MHz 110dB 80dB20MHz-3GHz 125 dB 95 dB3GHz-6GHz 123dB 93dB6GHz-6.8GHz 118dB 88dB; (10Hz) (3kHz)100kHz-20MHz 110dB 80dB20MHz-3GHz 125 dB 95 dB3GHz-6GHz 123dB 93dB6GHz-8.5GHz 118dB 88dB
Reflection track
300kHz-10MHz ±0.030dB10MHz-3GHz ±0.040dB3GHz-20GHz ±0.050dB
Transmission track
300kHz-10MHz ±0.030dB10MHz-3GHz ±0.040dB3GHz-6GHz ±0.100dB6GHz-20GHz ±0.150dB
Effective directivity
300kHz-10MHz 46dB10MHz-3GHz 42dB3GHz-6GHz 38dB6GHz-20GHz 36dB
Effective source match
300kHz-10MHz 37dB10MHz-3GHz 37dB3GHz-6GHz 31dB6GHz-20GHz 28dB
Effective load match
300kHz-10MHz 44dB10MHz-3GHz 42dB3GHz-6GHz 38dB6GHz-20GHz 36dB
Test points
1 to 16001
If bandwidth
Min. 1Hz;Max. 5MHz, in 1, 2, 3, 5, 7 step
Port connector type
3.5mm (male) 50 ohm system impedance
Number of test ports
2/4
Reference phase setting
Setting range:±500°Setting resolution:0.01°
Time-base reference output
Output frequency:10MHz Output level:+10dBm±4dB
Digital interface
GPIB, USB, Ethernet interface and VGA display interface
Operation system
Windows XP
Display
10.4-inch high brightness LCD
Test domain
Frequency domain, Time domain
Dimensions
436×236.5×410 (W×H×D) (including foot pad, foot, lateral stripping, input and output port)
Power consumption
150W
Power supply
50Hz single phase 220V or 50Hz/60Hz single phase 110V AC
Weight
18kg
System dynamic rangeif bandwidth:10hz
Frequency range; 2-port; 4-port
300khz-100mhz
95dB; 90 dB
100mhz-1ghz
110dB; 100 dB
1ghz-6ghz
120dB; 115 dB
6ghz-8ghz
117dB; 110 dB
8ghz-10ghz
115dB; 105 dB
10ghz-15ghz
110dB; 100 dB
15ghz-20ghz
100dB; 90 dB
ID de Anuncio
79681796

Descripción

3656A/BA/B/D vector network analyzer is applicable to fields of radio communications, cable TV, teaching and automotive electronics etc. It can be used for performance measurement of RF components such as filter, amplifier, antenna, cable, and cable television sub connectors etc. It adopts Windows operating system, and has functions of error calibration, time domain and fixture simulator; It supports multiple display formats such as logarithmic amplitude, linear amplitude, standing wave, phase, group delay, Smith chart and polar coordinates etc.; It provides multiple calibration types including frequency response, single port, response isolation, enhanced response and full dual-port, rapid SOLT calibration and electrical calibration; It is capable of multi-channel and multi-window display; It is designed with USB interface, LAN interface, GPIB interface and VGA interface.

Contactar al vendedor

Fabricante
N/A
Ubicación
🇨🇳 Qingdao, Shandong, China

¿Le interesa esta máquina?

Capacidad de respuesta del vendedor:

3.0