XQ20 high precision 200A AC mini clamp on split core current sensor en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Ratio
- Ratio 10001, 20001 or 25001 (customized)
- Accuracy class
- 0.1%, 0.2%
- Primary current
- 0-10A AC, 0-20A AC, 0-100A AC, 0-200A AC
- Secondary current
- 0-100mA AC, 0-200mA AC (customized)
- Max. cont. input current
- 120A, 240A
- Load capacity
- ≤20Ω, standard 4Ω
- Over voltage category
- CAT III 600V
- Output signal (ac current)
- From 0 to 200mA AC at nominal input current
- Output signal (ac voltage)
- From 0 to 5V AC at nominal input current
- Signal ratio
- 1mA/A, 1mV/A, 10mV/A, 100mV/A
- Frequency range
- 10Hz-2MHz
- Dielectric strength
- 3KV 50Hz/60Hz at 1minute
- Temperature range
- -20°C to +55°C
- Output
- 2.5 meter cable with D01 connector
- Max. voltage not insulated conductors
- 720V
- Standard
- EN 61010-1, EN 61010-2-032, EN 61010-2-031IEC60044-1, & IEC61869-2, 600V CAT III
- Installation
- Clamp type
- Two stall optional
- 10/100A, 20/200A
- Output mode
- Lead output (2.5m)
- Connector
- BNC, 4mm banana, audio plug,customized
- Dimensions (lxwxh)(mm)
- 52.5x137.5x28
- Weight (g)
- 400
- Holding wire diameter (mm)
- φ20
- Max. jaw opening (mm)
- 20
- Jaw color
- Red, yellow, blue, green, black
- Material
- PC+ABS+polycarbonate, UL94 V0
- Subcategoría
- Machinery
- Subcategoría 2
- Current probe
- ID de Anuncio
- 84813286
Descripción
The model XQ20 split core current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially ly suitable for on-site online testing.