Q8A-2 10A high sensitivity 0.1% permalloy core ct AC current clamp en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Ratio
- 10001, 20001 or 25001 (customized)
- Accuracy class
- 0.1%, 0.2%
- Primary current
- 0-5A AC, 0-10A AC, 0-20A AC
- Secondary current
- 0-10mA AC or 0-100mV AC (customized)
- Max. cont. input current
- 6A, 12A, 24A
- Load capacity
- ≤20Ω, standard 4Ω
- Over voltage category
- CAT III 600V
- Output signal (ac current)
- From 0 to 10mA AC at nominal input current
- Output signal (ac voltage)
- From 0 to 100mV AC at nominal input current
- Signal ratio
- 1mA/A, 1mV/A, 10mV/A, 100mV/A
- Frequency range
- 10Hz-200KHz
- Dielectric strength
- 3KV 50Hz/60Hz at 1 minute
- Temperature range
- -20°C to +55°C
- Output
- 2.5 meter cable with D01 connector
- Max. voltage not insulated conductors
- 720V
- Standard
- EN 61010-1, EN 61010-2-032, EN 61010-2-031IEC60044-1, & IEC61869-2, 600V CAT III
- Installation
- Clamp type
- Output mode
- Lead output (2.5m)
- Connector
- BNC, 4mm banana, audio plug, customized
- Dimensions (lxwxh)(mm)
- 45x158x25
- Weight (g)
- 250
- Holding wire diameter (mm)
- φ8
- Max. jaw opening (mm)
- 8
- Jaw color
- Black
- Material
- PC+ABS+polycarbonate, UL94 V0
- Categoría
- Pinzas amperimétricas en China
- Subcategoría
- Machinery
- Subcategoría 2
- Current probe
- ID de Anuncio
- 84813311
Descripción
AC current clamps are devices with jaws that open up and clamp around an electrical conductor to measure current. They are very useful as they allow you to They are very useful as they allow you to clip the probe around an existing conductor without having to disconnect and reroute cables.