q40 500a good linearity universal ac clamp on current ct sensor en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Ratio
- 10001 or 20001 (customized)
- Accuracy class
- 0.1%, 0.2%, 0.5%
- Primary current
- 0-500A AC
- Secondary current
- 0-500mA AC or 0-5V AC (customized)
- Max. cont. input current
- 600A
- Load capacity
- ≤10Ω, standard 4Ω
- Over voltage category
- CAT III 600V
- Output signal (ac current)
- 250mA, 500mA, 1V, 5V AC at nominal input current
- Output signal (ac voltage)
- 250mV, 500mV, 1V, 5V AC at nominal input current
- Frequency range
- 10Hz-200KHz
- Dielectric strength
- 3KV 50Hz/60Hz at 1 minute
- Temperature range
- -20°C to +55°C
- Output
- 2.5 meter cable with D01 connector
- Max. voltage not insulated conductors
- 720V
- Standard
- EN 61010-1, EN 61010-2-032, EN 61010-2-031IEC60044-1, & IEC61869-2, 600V CAT III
- Installation
- Clamp type
- Output mode
- Lead output (2.5m), 5m or customized
- Connector
- BNC, 4mm banana, signal cable (2 cores), customized
- 0-0.5a
- ≤0.5°
- 0.5-5
- ≤0.2°
- 5-600a
- ≤0.1°
- Dimensions (lxwxh)(mm)
- 82x290x25.3
- Weight (g)
- 500
- Holding wire diameter (mm)
- φ40
- Max. jaw opening (mm)
- 40
- Jaw color
- Black
- Material
- PC+ABS+polycarbonate, UL94 V0
- Subcategoría
- Machinery
- Subcategoría 2
- Current probe
- ID de Anuncio
- 84813318
Descripción
The Q40 series clamp on current sensor are high performance current clamp models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range.