JW-808H Reflow exit conveyor en Shenzhen, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Dimensión exterior
- 1500*550*1120mm
- Altura del transportador
- 950+/-20mm
- Ancho de la correa de pcb
- 408mm
- Ancho total de la máquina
- 432mm
- Longitud del transportador
- 1.5M
- Cantidad de ventiladores de refrigeración
- 6 piezas en total
- Estructura de la máquina
- marco de aluminio
- Dirección
- De izquierda a derecha; de derecha a izquierda
- Interruptor de pie
- estándar
- Ventiladores de enfriamiento
- cantidad personalizada
- Alarma
- Automáticamente cuando la PCB llega al final de la cinta
- Material del cinturón
- Negro ESD de alta temperatura
- Enchufe de comunicación
- enchufe de señal SMEMA para línea ascendente y descendente
- Peso
- Aproximadamente 75 kg
- Subcategoría
- Pcb link conveyor
- ID de Anuncio
- 85375724
Descripción
1.Reflow oven exit conveyor
2.High temperature belt
3.Customerized width
4.Cooling fans installed
Reflow exit conveyor function
The reflow exit conveyor is used to transport PCB after reflow oven,which is specially made for clients according to their request.
Technical Specification:
Product Details:
1.Conveyor Left to Right: Left Side Connects to Reflow Oven.
2.Height conveyor(from ground to belt): 950mm +/-20mm adjustable with Hand Crank
3.Standard high temperature belt is 60~70 degree Celsius
4.Extension on LEFT SIDE: 152.4mm (6 inches),Overall Height of Extension (Including Belt + Roller) is Approximately 25mm .
5. Sensors and Sound Alarm,Light Tower towards the end of conveyor
6.Once PCB reaches end of conveyor, Audible Alarm & Light Tower will turn on
7.Conveyor will move forward upon PCB exiting reflow
8.Conveyor stops when the board is out of the reflow
9.Stop/Go Configuration with Middle Sensor
Pictures:
About us: