6ES7352-5AH00-0AE0 FM 352-5, BOOLEAN PROCESSOR 12DE/8DA en Shenzhen, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Artikelnummer
- 6ES7352-5AH00-0AE0
- 24 v dc
- Yes
- Rated value (dc)
- 24 V
- Permissible range, lower limit (dc)
- 20.4 V
- Permissible range, upper limit (dc)
- 28.8 V
- Reverse polarity protection
- Yes
- From load voltage1l , max.
- 150 mA; typ. 60 mA
- From load voltage 2l (without load), max.
- 200 mA; typ. 60 mA, DI/DO supply
- From load voltage 3l (with encoder), max.
- 600 mA; typ. 80 mA plus encoder supply
- From load voltage 3l (without encoder), max.
- 200 mA; typ. 80 mA
- From backplane bus 5 v dc, max.
- 100 mA; Typical
- 5 v
- Yes
- Short-circuit protection
- Yes; Overvoltage protection, thermal protection
- Output current, max.
- 400 mA
- 24 v
- Yes
- Power loss, typ.
- 6.5 W
- Memory card, ram
- 128 kbyte; required for operation, MMC
- Number of digital inputs
- 8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs
- Input voltage
- 24 V
- Rated value, dc
- 24 V
- For signal "0"
- -30 to 5 V
- For signal "1"
- 11 to 30 V
- For signal "0", max. (permissible quiescent current)
- 1.5 mA
- For signal "1", typ.
- 3.8 mA
- Input frequency (with a time delay of 0.1 ms), max.
- 200 kHz
- Programmable digital filter delay
- None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.5 ms
- Minimum pulse width for program reactions
- 1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms
- At "0" to "1", max.
- 3 µs; typ. 1.5 µs
- Cable length, shielded, max.
- 320 m; Cable length, RS-422 SSI absolute encoders, Siemens type 6FX201-5, 24 V supply: 125 kHz, 320 meters shielded, max.; 250 kHz, 160 meters shielded, max.; 500 kHz, 60 meters shielded, max.; 1 MHz, 20 meters shielded, max.
- Cable length unshielded, max.
- 100 m
- Number of digital outputs
- 8
- Current-sinking
- Yes
- Response threshold, typ.
- 1.7 to 3.5 A
- Limitation of inductive shutdown voltage to
- 2M 45 V typ, (40 to 55 V); comment: no protection against inductive kickback ＞55 mJ
- Controlling a digital input
- No
- Lamp load, max.
- 5 W
- For signal "0", max.
- 28.8 V
- For signal "1", max.
- 0.5 V
- For signal "1" rated value
- 0.5 A; At 60 °C
- For signal "1" permissible range for 0 to 60 °c, min.
- 5 mA
- For signal "1" permissible range for 0 to 60 °c, max.
- 600 mA
- For signal "0" residual current, max.
- 1 mA
- 0" to "1", max.
- 1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A
- 1" to "0", max.
- 1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A
- For uprating
- Yes; 2
- With resistive load, max.
- 100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A
- With inductive load, max.
- 2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes
- On lamp load, max.
- 10 Hz
- Incremental encoder (symmetrical)
- Yes
- Incremental encoder (asymmetrical)
- Yes
- Absolute encoder (ssi)
- Yes
- 2-wire sensor
- Yes; typ. 1 A
- Permissible quiescent current (2-wire sensor), max.
- 1.5 mA
- Trace mark signals
- A, B
- Zero mark signal
- N
- Input signal
- 5 V difference signal (phys. RS 422)
- Input frequency, max.
- 200 kHz
- Data signal
- DATA, notDATA
- Clock signal
- CK, notCK
- Telegram length, parameterizable
- 13 or 25 bit
- Clock frequency, max.
- 1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz
- Monoflop time
- settable: 16/32/48/64 µs
- Listening mode
- Yes; one or two stations
- Multiturn
- Yes; 25 bit message frame
- Counting direction, forward
- Yes
- Counting direction, backward
- Yes
- Input- to output response time
- 5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)
- Updating time
- PLC interface: 5 ms (2.6 ms type)
- Diagnostic alarm
- Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow
- Hardware interrupt
- Yes; 8 available; for generation by user program
- Wire-break in signal transmitter cable
- Yes
- Overflow/underflow
- Yes
- Missing load voltage
- Yes
- Module supply 5 v dc (green)
- Yes
- I/o status iof (red)
- Yes
- Micro memory card error mcf (red)
- Yes
- Run mode run (green)
- Yes
- Group error sf (red)
- Yes
- Status indicator digital output (green)
- Yes; Q 0 to Q 7
- Status indicator digital input (green)
- Yes; I 0 to I 11
- Stop mode stop (yellow)
- Yes
- Overload encoder supply voltage 24 v f (red)
- Yes
- Overload encoder supply voltage 5 v f (red)
- Yes
- Counting range, description
- Counting range (16-bit counters): -32,768 to 32,767 (user-specific within this range); counting range (32-bit counters): -2,147,483,648 to 2,147,483,647 (user-specific within this range)
- Counting range, lower limit
- -2 147 483 648
- Counting range, upper limit
- 2 147 483 647
- Counting mode, individual
- Yes
- Counting mode, continuous
- Yes
- Counting mode, periodic
- Yes
- Between 1l and 2l and 3l
- Yes; 75 VDC / 60 VAC
- Between digital i/o and 2l and encoder i/o and 3l
- Yes (75 V DC, 60 V AC)
- Between backplane bus and digital encoder i/o & 1l & 2l & 3l
- Yes (75 V DC, 60 V AC)
- Galvanic isolation digital inputs
- Yes; Yes CPU, I/O and sensor units are isolated
- Ip20
- Yes
- Min.
- -40 °C
- Max.
- 70 °C
- Program cycle time (scan)
- 1 µs
- Required front connector
- 1x 40-pin
- Width
- 80 mm
- Height
- 125 mm
- Depth
- 120 mm
- Weight, approx.
- 434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)
- Last modified:
- 31.07.2014
- Subcategoría
- Plc
- Subcategoría 2
- S7-300
- Subcategoría 3
- Siemens plc all
- ID de Anuncio
- 88368036
Descripción
SIEMENS S7-300 6ES73525AH000AE0 SIMATIC S7-300, FM352-5,HIGH SPEED BOOLEAN PROCESSOR,,FOR HIGH-SPEED LOGIC OPERATION,12 DI, 8 DO, 1 ENCODER INTERF.,FOR RS422 INCR./SSI ENCODERSIMATIC S7-300, FM352-5,HIGH SPEED BOOLEAN PROCESSOR,,FUER HOCHGESCHWINDIGKEIT