ASTM – Automatic Compression Testing Machines for Blocks and Cylinders (UTC-4725.FPR) en Alberton, Gauteng, Sudáfrica
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- UTC-4725.FPR
- Normas
- ASTM C39; C140; C1314
- Utc-4725.fpr
- Máquinas de ensayo de compresión automáticas de 2000 kN (450000 lbf) para bloques y cilindros, ASTM
- Utc-4735.fpr
- Máquinas de ensayo de compresión automáticas de 2000 kN (450000 lbf) para bloques y cilindros, ASTM
- Utc-4528
- Equipo de reemplazo de platinas de cojinete superiores para UTC-4725 y UTC-4735
- Utc-0210
- Transductor de Presión de Alta Precisión y Electrónico
- Utc-4682
- Pedestal para marcos de ensayo de compresión de 1500 kN (335000 lbf), 2000 kN (450000 lbf) y 3000 kN (670000 lbf)
- Modelos para 220-240v, 50-60hz, 1ph
- UTC-4725.FPR
- Modelos para 110v, 60 hz, 1 ph
- UTC-4725.FPR-N
- Modelos
- UTC-4725.FPR
- Capacidad
- 2000 kN (450000 lbf)
- Tipo de bastidor
- Acero soldado
- Bloque de cojinete inferior, dimensiones (d)
- (Bloque) 310x410x90 mm (12.2”x16.1”x3.5”) (Circular) Ø165 mm (6.5″)
- Bloque de cojinete superior, (con conjunto de asiento esférico) dimensiones (c)
- (Bloque) 310x410x90 mm (12.2”x16.1”x3.5”) (Circular) Ø165 mm (6.5″)
- Dureza de la superficie de las platinas de rodamiento
- (Bloque) 60 HRC (Circular) 55 HRC
- Tolerancia de planitud
- (Bloque) 0,025 mm/150 mm (0,001”/6”) (Circular) 0,02 mm/150 mm (0,001”/6”)
- Altura máxima libre entre bloques de rodamientos (e)
- (Bloque) 250 mm (9,84”) (Circular) 380 mm (15”)
- Diámetro del pistón
- 250 mm (9,84”)
- Carrera del pistón
- 50 mm (1,97”)
- Libre horizontal (b)
- 360 mm (14,17”)
- Dimensiones (ancha x larga x alto) (axd*xf)
- 790x453x1144 mm (31,1×17,83”x45,04”)
- Peso
- 993 kg (2190 lb)
- Pedestal (opcional)
- UTC-4682
- Categoría
- Prueba de materiales en Sudáfrica
- Subcategoría
- Concrete
- Subcategoría 2
- Automatic-astm & aastho compression testing machines
- ID de Anuncio
- 91070122
Descripción
AUTOMATIC Compression Testing Machines
Product Code:
Description:
UTC-4725.FPR and UTC-4735.FPR models Automatic compression Testing Machines have been designed for testing both blocks and cylinders specimens with the same frame according to ASTM standards.
These machines also meet the requirements of CE norms with respect to the health and safety of the operator.
The frames of the machines have a rectangular and a circular bearing platen set (each consists of a lower and a spherically-seated upper platen).
Depending on the type of specimen to be tested, the bearing platens set can be easily switched with other set with help of UTC-4525 by users.
The machines allow inexperienced operators to perform the test.
Once the machine has been switched on and the specimen is positioned and centred by the help of concentric centring lines of lower bearing platen.
The only required operations are:
– Setting test parameters, including pace rate (only required when the specimen type is changed).