Auto Rebar Cutting System(KMC-60AS) en Daegu (Taegu), Daegu, Corea del Sur
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Feed conveyor unit
- 1.5kw×2
- Supple table
- 1.5kw×4
- Compressor
- 7.5kw×1
- Electric
- 220V / 380V 3Phase
- R p m
- 27rpm
- Feed conveyor speed
- 49m/min
- Blade dimension
- 300mm×100×50
- Cutting length (mm)
- 600 (min) ~ 12000 (max)
- Supply table speed
- 6.7m/min
- Loading capacity
- 6000kg
- Dimensions (m/m) (l×w×h)
- 25,090m×3,460×1,740
- Weights (kg)
- 10,000kg
- Subcategoría
- Auto rebar cutting system
- ID de Anuncio
- 92136676
Descripción
The productivity of steel Cutting can be increased in comparison with the standing manual system by more than 30 times (Refer to the daily work schedule.)
It will be made easier to upload the steel products onto the steel-supplying table because the steel set-up safety system is applied in times of steel providing.
As the main body of the machine consists of multi-stage gear and a powerful fly wheel, the steel Cutting and Bending process can be achieved easily and powerfully.
With the Fine-distance Tuning Gauge, steel materials can be cut to minute measurements.
Since the Automatic moving stopper props up the machine firmly, there in very little chance of errors taking place in measuring the steel length.
The length of discharge table can be easily adjusted according to the conditions of an on-the-spot system.