Debinding And Sintering Furnace en Henan, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Max.design(℃)
- 1100
- Internal dimensions d x w x h (mm)
- 500*500*500MM or customized
- Power(kw)
- 28
- Voltage(v)
- 380V 3相
- Volume (litres)
- 125
- Thermocouple type
- K
- Heating rate
- 0-20C/min
- Temp.precision
- ±1℃
- Furnace structure
- Double-layer air-cooled structure, surface temperature is less than 60℃
- Furnace chamber material
- It is built with refractory bricks, which have a longer service life and higher furnace cleanliness than ceramic fiber materials.
- Heating method
- Five-sided heating, using high-quality resistance wire, spirally wound with corundum tube inside, non-uniform distribution design through the refractory brick reserved cut buckle hanging on the five sides of the furnace (both sides of the furnace, furnace door, back wall, bottom), each wire heating rod is fixed to the furnace wall with ceramic rods at both ends to prevent the resistance wire from shrinking when used at high temperature.
- Thermal field control method
- Low-temperature hot air circulation, high-temperature five-sided heating radiation automatic switching.
- Debinding stage
- According to the pre-set program, the debinding port and fresh air supply are automatically opened, the fresh air preheating system is started, and the preheated fresh air slowly enters the furnace through the pre-set air volume of each temperature stage to realize hot air circulation. A large amount of gas exchange will promptly discharge the organic compounds generated by debinding out of the furnace.
- Gas system
- There are air inlets in the furnace for air to enter and circulate, and exhaust holes on the top for harmful gases to be discharged.
- Exhaust gas treatment device
- The debinding furnace is equipped with an exhaust gas treatment device, which uses resistance wire heating to decompose harmful gases and is equipped with an exhaust fan to discharge combustion gases.
- Temperature controller
- Adopting European instruments, multiple multi-stage programs can be set, with high temperature control accuracy,SSR control, PID parameter self-tuning function; program temperature rise, program heat preservation, program cooling
- Operating temperature
- RT～1000℃
- Q
- What about the Minimum Order Quantity?
- A
- The MoQ is 1 pcs.
- Hot tags
- debinding and sintering furnace, China debinding and sintering furnace manufacturers, suppliers
- Categoría
- Hornos industriales en China
- Subcategoría
- Industrial sintering furnace
- ID de Anuncio
- 96532834
Descripción
High quality energy-saving refractory bricks
125L volume or customized
High quality resistance wire is spirally wound through corundum tube for heating, five-sided arrangement
Products Description
Debinding and sintering furnace is mainly designed for the integrated degreasing and pre-sintering process of fine ceramic components such as aluminum nitride, silicon nitride substrates, alumina, zirconium oxide, dielectric ceramics, etc. It can also be used for ceramic powder materials, solid-state fuel cells SOFC, LTCC, MLCC, NTC, NFC, ceramic cores and other electronic components for debinding, pre-burning and firing and powder decarbonization.
The thermal material of Debinding and sintering furnace is made of high-quality energy-saving imported foam bricks. The heating element is heated by high-quality resistance wire wound spirally through a corundum tube, and the heating tube is arranged on five sides. The control instrument uses the European program controller imported from the UK.