Sonifex RB-ADDA2 Combined A/D and D/A Converter en Londres, Inglaterra, Reino Unido
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- RB-ADDA2
- Maximum input level
- +27dBu balanced inputs, +17dBu unbalanced inputs
- Input impedance
- ＞10kΩ unbalanced, ＞20kΩ bridging balanced
- Dynamic range
- ＞110dB
- Gain range
- Adjustable input gain of ±3dB on selected +12dBu, +18dBu or +24dBu, ref FSD
- Distortion & noise
- ＞96dB THD + N at 1kHz
- Analogue inputs
- 2 x XLR 3 pin (balanced) / 2 x RCA phono (unbalanced)
- Sync inputs
- 1 x AES/EBU XLR 3 pin female / 1 x TTL Word clock BNC
- Digital outputs
- 1 x AES/EBU XLR 3 pin male / 1 x S/PDIF RCA phono / 1 x TOSlink optical
- Serial rs232
- x 9 pin D-type plug
- Mains input
- Filtered IEC, continuously rated 85-264VAC @ 47-63Hz, 10W max
- Fuse rating
- Anti-surge fuse 1A 20 x 5mm
- Analogue input source
- Balanced XLR or unbalanced phono, via A/D SOURCE push-button
- Analogue input level for fsd
- +12dBFS, +18dBFS or +24dBFS, via A/D SOURCE push-button
- Analogue input level adjust
- +9dBu to +27dBu via rear-panel pre-set pots
- Sample frequency rates
- 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz, via FREQUENCY push-button
- Bit depth
- 16, 20 or 24 bits, via BITS push-button
- Channel status bits
- Consumer mode, professional mode or follow input, via CS DATA push-button
- Sync input select
- AES/EBU, Word Clock or D/A input, via SYNC push-button
- Sync mode select
- Master, slave, auto, auto lock, via SYNC push-button
- Maximum output level
- +24dBu balanced output, +14dBu unbalanced output
- Output impedance
- ＜50Ω balanced, ＜75Ω unbalanced
- Digital inputs
- 1 x AES/EBU XLR 3 pin female / 1 x S/PDIF RCA phono/ 1 x TOSlink optical
- Analogue outputs
- 2 x XLR 3 pin male (balanced) / 2 x RCA phono (unbalanced)
- Digital input select
- AES/EBU, S/PDIF or TOSlink optical, via push-button
- Analogue output level for fsd
- Selectable +12dBu, +18dBu or +24dBu output level, ref FSD, via D/A SOURCE push-button
- Rb-adda2
- Combined A/D and D/A converter, 24 bit 192kHz
- Dimensions (raw)
- 48cm (W) x 15.8cm (D*) x 4.2cm (H) (1U) 19” (W) x 6.2” (D*) x 1.7” (H) (1U)
- Boxed)
- 59cm (W) x 27.5cm (D*) x 11cm (H) 23.2” (W) x 10.8” (D*) x 4.3” (H)
- Weight
- Nett: 1.6kg Gross: 2.3kg
- Nett
- 3.5lbs Gross: 5lbs* Note that this product is deeper than standard Redboxes.
- Categoría
- Audiovisual/Broadcast en Reino Unido
- Subcategoría
- Audio
- Subcategoría 2
- Recording
- Subcategoría 3
- D/a converters
- Subcategoría 4
- Digital audio converters
- ID de Anuncio
- 96535117
Descripción
Combined A/D and D/A Converter (24 bit, 192kHz Capable) (1U)
The RB-ADDA2 A/D and D/A converter is a 1U rack-mount which produces an AES/EBU, S/PDIF or TOSlink optical level digital audio output from a balanced XLR or unbalanced phono stereo audio input. It also produces a stereo balanced XLR or unbalanced phono output from an incoming AES/EBU, S/PDIF or TOSlink optical digital input signal.
The RB-ADDA2 is a high performance, enhanced version of the RB-ADDA providing the following additional features:
It supports higher sample frequency rates up to and including 176.4kHz and 192kHz.
It has additional independent AES/EBU and Word Clock synchronising inputs, so that the A/D and D/A sections can operate independently, with the digital outputs synchronised to an external master reference clock.
It has TOSlink optical digital audio input and output.
It has front panel push-button switches for all the main settings.
$1,300 USD