Powershield Commander PSCM2000 2000VA Pure Sine Wave UPS en Alfredton, Victoria, Australia
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- PS6285
- Model number
- PSCM2000
- Capacity (pf = 0.9)
- 2000 VA / 1800 W
- Nominal voltage
- 240Vac
- Acceptable voltage range
- 162-290 VAC
- Frequency range
- 50/60Hz ± 5Hz (auto sensing)
- Voltage regulation (ac mode)
- 240Vac (Selectable 208/220/230Vac) ± 10% AVR
- Voltage regulation (batt. mode)
- ± 1.5% (before battery alarm)
- Frequency range (batt. mode)
- 50 Hz or 60 Hz ± 1 Hz
- Current crest ratio
- 3:1
- Total harmonic distortion
- 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
- Transfer time
- 6ms (Typical), 10ms max.
- Waveform (batt. mode)
- Pure Sine Wave
- Ac mode
- 98% (Advanced ECO design)
- Battery mode
- 91%
- Battery type & number
- 12V / 9AH (x4)
- Recharge time
- 4 hours recovery to 90% capacity
- Full protection
- Overload, thermal, short circuit, discharge, and overcharge protection
- Surge protection
- 1968 Joules / 39000 Amps
- Operation temperature
- 0 - 40°C
- Relative humidity
- 0-90% (RH non-condensing)
- Noise level
- < 45dB
- Interface
- USB and RS-232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
- Software
- PowerShield NetGuard® software - supports Windows-based operating systems, Linux, Unix, and Mac
- Lcd display/alarm
- AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining
- Audible alarm
- Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload
- Safety
- EN62040-1 -1 2003, IEC 60950-1 -1
- Emc
- EN62040-2 2006
- Rohs
- Directive 2011/65/EU
- Depth
- 455 mm
- Width
- 145 mm
- Height
- 220 mm
- Net weight
- 20.5 kg
- Gross weight
- 22.5 kg
- Subcategoría
- Power supplies
- Subcategoría 2
- Electrical trades
- Subcategoría 3
- Ups - uninterrupted power supplies
- ID de Anuncio
- 96897637
Descripción
The Powershield Commander PSCM2000 2000VA UPS delivers pure sine wave power for efficient, low-heat operation. It includes Automatic Voltage Regulation (AVR) and provides a pure sine wave output during backup. Ideal for servers, motors, and sensitive equipment, it features IEC outlets, RJ11 surge protection, and a front panel LCD for real-time battery and load monitoring. Safety features include an audible alarm, and protection against discharge, overcharge, short circuits, overheating, and overload. Management software is included and supports most operating systems.
Pure Sine Wave Output
The Commander Tower provides a sine wave output, even when the UPS is running off of its batteries.
The pure sine wave offers an economical solution to back up gates, cameras, computers, motors, telephone systems and other sensitive equipment.
Output Power Factor 0.9
With a 0.9 power factor, the Commander Tower UPS offers high-density performance and efficiency for critical applications.
$858 USD