Usado table type en México

CK-EM12 - CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS - 12" ANCHO

• nuevo

HP-EMA-250 – CABECEADORA - CONTINUA - PARA TABLAS Y PISOS – 40-250 MM ANCHO

• nuevo

1.max. / min. width: 250mm / 40mm | 3.min. board length: 270 mm | 4.max. board length: Unlimited | 5.max. board weight: 15kgs | 11.max. cutter head dia.: 160mm | 15.feed speed: 90M/min. | 18.controls: Manual or A...

HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO

• nuevo

1.max. / min. width: 300mm / 40mm | 3.min. board length: 270mm | 4.max. board length: Unlimited | 5.max. board weight: 15kgs | 13.cutterhead inner dia.: 40mm | 15.feed speed: 90M/min. | 18.controls: Manual or Aut...

ESPIGADORA 1 LADO - FINGER JOINT - SEMIAUTOMATICO

• nuevo

Table size (w x l): 520 x 650 mm | Shaper spindle diameter: φ50mm | Shaper blade diameter: φ160mm | Main saw blade size: φ255mm | Shaper spindle speed: 6000 rpm | Main saw spindle speed: 2840 rpm | Total power: 1...

CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICO

• nuevo

Part number: 2CK-FL-08 -

ENGANCHADORA CON CONTROLADOR NC

• nuevo

LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1 HP C/U

• nuevo

Motors: (2) 1 HP 6 pole 3ph | 222: 208-240v / 1 or 3ph / 50-60hz | 224: 400-480v / 3ph / 50-60hz | Arbor: 1" Dia. by 6" Tall | Vertical travel: 6" | Table travel: 2" | Table height: 36 inches | Table size: 60" x ...

GM-EFM-1014CNC - DOBLADORA DE METAL - 10' X 14 GA - CNC

• nuevo

Part number: 2GM-EFM-1014CNC -

TALADRO MULTIPLE 21

• nuevo

• Fabricante: amxmachinery.com

CEPILLO 4 CARAS – 16” ANCHO - MIDA

• usado

MOLDURADORA 4 CABEZALES

• nuevo

Feeding motor: 3Kw – 4 HP | Feed beam: 0.75kW | Working width: 20-130mm | Working thickness: 8-100mm

CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA

• nuevo

• Fabricante: Marunaka

Max work height: 180mm | Feed speed: 54m/min (50 hz) | Feed motor: 2.2 Kw, 3 phase | Knife type: Chanching blade type | Front knife size: 335 x 66 x 8mm | Net weight: 430Kgs