Usado cúter en Reino Unido

Stenner ST100

• Fabricante: Stenner

Pulley wheel diameter: 915 mm (36") | Blade width: 100 mm (4") | Blade length, min. - max.: 5385 - 5485 mm | Saw to fence capacity: 300 mm | Saw to feed capacity: 230 mm | Depth of cut, max.: 380 mm | Motor: 15 k...

SIP WELDMATE PRO 40 AMP PLASMA CUTTER. 12MM MAXIMUM CUT. 240VOLT SINGLE PHASE. UK

• Fabricante: SIP

Input amperage: 40 amps | Item type: Plasma Cutter

Sennheiser MK 8 Condenser Microphone

• Fabricante: Sennheiser
• Nivel de ruido: 10 decibel

Dimensions: 160 x 57 mm (L x D) | Frequency response: 20 Hz – 20 kHz | Transducer principle: externally polarised condenser microphone, 1‘‘ diaphragm | Weight: 485 g | Pick-up pattern: Switchable: omni-directiona...

SCM Centauro R800 RVP200

• Fabricante: Centauro

Pulley wheel diameter: 800mm | Blade length: 5530 - 5380mm | Blade width: 0.8 - 80mm | Saw to fence capacity: 200mm | Depth of cut, max.: 400mm | Fence tilt: 0-15° | Working height: 950mm | Feed speed, infinitely...

Stenner ST9

• Fabricante: Stenner

Pulley wheel diameter: 915 mm (36") | Blade width: 100 mm | Saw to fence capacity: 305 mm | Saw to feed capacity: 230 mm | Depth of cut, max.: 370 mm | Fence tilt: 0 - 35° | Working height: 955 mm | Feed speed, i...

Up Cutting Saw ACK 550

2013 WOHLENBERG 115 FLOWLINE

• Fabricante: Wohlenberg
• Modelo: 115

Dangerous Music Compressor

• Fabricante: Dangerous Music

Frequency response: +/-0.25dB from 15Hz to 80kHz | Maximum level: ＞ +27dBu | Noise floor: ＜ -93dBu band limited from 22Hz-22kHz | Thd+n: ＜ 0.005% | Imd: ＜ 0.007% | Crosstalk rejection: ＞ 115dB @1kHz | Input imped...

Orec HR812

Iseki SRA 800

• Fabricante: Iseki
• Modelo: SRA800
• Potencia (hp): 16 horsepower
• Ancho de corte: 31.49606299212599 inch

Orec HRC813

Orec RM952

Iseki SRA950F

• Fabricante: Iseki
• Modelo: SRA950F
• Potencia (hp): 24 horsepower
• Ancho de corte: 37.40157480314961 inch

Orec RM982F

Etesia Attila AK98X

• Fabricante: Etesia