Usado cnc tornos en osutoria

Torno CNC Doble Husillo Miyano

• Fabricante: Miyano

Torno CNC WNCL – 20 FEMCO

• Fabricante: Femco

TORNO CNC Okuma Howa

• Fabricante: Okuma

Torno CNC Hitachi Sriki Fanuc

• Fabricante: Hitachi

TORNO CNC Millano BNC-12

• Fabricante: Miyano
• Modelo: BNC12C

Torno CNC Hardinge Conquest 42

• Fabricante: Hardinge
• Modelo: CONQUEST 42

KLS 1840N

Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...

Torno CNC HITACHI SEIKI HITEC- TURN 23SII

• Fabricante: Hitachi Seiki
• Modelo: Hitec-Turn

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

KLS 1220N

Characteristics: KLS 1220N | I turn over the bench: 11.8″ | Turning on the cross slide: 5.3″ | Distance between points: 19.6″ | Width of the bed: 13.8″ | Spindle nose: D1-4 | Hole through the spindle: 1.49″ | Spi...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

KVT 100E

Características: KVT 100E | Diámetro máximo de giro: 39.3 | Longitud máxima de giro: 27.5 | Diámetro máximo de vuelco: 43.3 | Nariz del husillo: A2-11

KLM 200S

Características: KLM 200S | husillo secundario: SI | Diámetro máximo de giro: 10.2 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secunda...