Usado combinado en Japón

AC/DC CURRENT SENSOR CT6904A-2, CT6904A-3

Rated current: 800 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1200 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A-2), DC...

AC/DC CURRENT SENSOR CT6904A, CT6904A-1

Rated current: 500 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1000 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A), DC t...

AC/DC CURRENT SENSOR CT6862-05

Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...

EXFM-ONE

• Fabricante: HORIBA, Ltd.

ロータリードリル. 次世代ドリフター

• Fabricante: Hirado Kinzoku Kogyo Co.,ltd.

Tipo: HRD-90 / HRD-90R | Dirección de giro: Fijo / Selección | Número de impactos (b/min): 3300 | Fuerza de impacto (n-m): 71 | Par de rotación (n-m): 113 / 78 | Velocidad de rotación (rpm): 0-182 | Peso (kg): 39

HORIBA Scientific Hybrid Picosecond Photon Detector (HPPD) Series

• Fabricante: Horiba

HORIBA France SAS Cathodoluminescence - CLUE Series

• Fabricante: Horiba

HORIBA France SAS CombiScope

• Fabricante: Horiba

ESL- InfoTag

• Fabricante: Teraoka Seiko

Modelo (4-colour): InfoTag 1.54"; InfoTag 2.13"; InfoTag 2.66"; InfoTag 2.9"; InfoTag 3.7"; InfoTag 4.2"; InfoTag 5.83"; InfoTag 7.5"; InfoTag 10.2" | Medidas ancho x alto x fondo (mm): 70 x 38 x 16; 90 x 42 x 16...

DC-782

Capacidad: 3kg/6 libras; 6kg/15 libras; 15kg/30 libras; 30kg/60 libras; | Intervalo individual: 500g/1libra; 1kg/2.5 libras; 2.5kg/5 libras; 5kg/10 libras; 10kg/25 libras | Display para operador: Display de peso:...

HORIBA STEC, Co., Ltd. PV Series

• Fabricante: Horiba

Flow range: 10/20 LM | Flow control range: 2 -100% F.S. | Valve type: normally open / close | Input signal: 0 - 5VDC | Responce: less than 0.5 sec. | Operating temperature: 0 - 50 °C | Operating diffential pressu...

TFH-01/47

• Fabricante: Horiba

Spex Sample Prep Hammer-Cutter Mill

• Fabricante: Spex

Voltage: 115V/60Hz or 230V/60Hz | Ce approved: YES | Dimensions: 9.9 in (25.1cm) x 12.8 in (32.5cm) x 18.9 in (48cm) | Net weight (lbs): 26.5 lbs (12kg) | Power cord: 3-prong grounded plug, 115V 60Hz | Timer/cont...

IMPULSE WINDING TESTER ST4030A

• Fabricante: HIOKI E.E

Measurement items: • Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment • Waveform judgment using AREA value, Flutter, Laplacian etc. • Equ...

HORIBA STEC, Co., Ltd. VC Series

• Fabricante: Horiba

Liquids supported: TEOS, P(OCH3)3, C6F6 | Temperature rise: Max. 150°C | Pressure generated*1: Reduced pressure | External leak integrity: 1.0x10-8Pa·m3/s | Internal leak integrity: 1.0x10-6Pa·m3/s | Wetted matel...