Usado control unit en México

Omron CRT1-OD16TA PLC Output Module – 24VDC – New in Box – Japan

• Fabricante: Omron

2018 ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A

• Fabricante: Biesse
• Modelo: Akron

Minimum width of the part: 85mm | Minimum piece length: 140mm

LAMINADORA DE MOLDURAS – PUR HOTMELT

NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE

Spindle: HITECO HSK F63 11KW ATC | Vacuum pump: BECKER 250M3 | Remote control: YES | Loading lift: Optional | Unloading converyor: Optional

KLS 1840N

Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...

CSM 1440 CNC

Characteristics: CSM 1440 CNC | I turn over the bench: 14 " | Turning on the cross slide: 8-5/8″ | Distance between points: 40″ | Width of the bed: 8.1″ | Spindle nose: Camlock D1-4 (Opt. ASA A1-4) | Hole through...

KLS 2660N

Characteristics: KLS 2660N | I turn over the bench: 26″ | Turning on the cross slide: 9.05″ | Distance between points: 59″ | Width of the bed: 15.9″ | Spindle nose: D1-8 (Opt. ASA A1-8) | Hole through the spindle...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

CRL 1640 CNC

Characteristics: CRL 1640 CNC | I turn over the bench: 16 " | Turning on the cross slide: 9.05″ | Distance between points: 35″ | Width of the bed: 10.23″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole throug...

LIJADORA DE BANDA ANCHA - 36 PULGADAS

Part number: 2CK-C371 | Feed speed: variable

ARMADORA DE CAJONES

• Fabricante: amxmachinery.com

LIJADORA DE BANDA ANCHA - 24 PULGADAS

Part number: 2CK-C251 | Feed speed: variable

LIJADORA DE BANDA ANCHA - 43 PULGADAS

Part number: 2CK-C431 | Feed speed: variable

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...