Usado loader en Lisboa, Portugal

CLARK MICHIGAN 75-3A LARGE LOADER WHOLE LARGE 4X4 MICHIGAN IS TRADE MARK OF CLARK EQUIPEMENT CO. TRACTOR SHOVELClark Michigan 75-A3 Wheel LoaderIten: 4X4 WHEEL LOADER BRAND: CLARK MODEL: MICHIGAN 75 -A3 SERIAL NO: 4069-D-106EN

• Fabricante: Michigan
• Horas: 3 hour

Capacidad del cubo: 2 METROS CÚBICOS | Fuerza de arranque: 119.6 kN | Longitud entre el eje: 2858 mm | Altura máxima con cubo recto: 3.8 mt | Altura máxima con cubo hacia arriba: 4.20 mt | Potencia neta: 115 kW |...

DEUTZ AGROPLUS 75 DT WITH FRONT LOADER - 1999-10

• Fabricante: Deutz

Anayak Matic

• Fabricante: Anayak

Cursos: 800x500x505 [mm] | Controlador: Fanuc

Claas Arion 660 Cmatic First Claas

• Fabricante: Claas
• Modelo: ARION 660

MBB Palfinger. 2000k

• Fabricante: Palfinger
• Horas: 2,009 hour
• Fuerza de elevación: 2,000 kilogram

Lifting capacity: 2,000 kg. | Main beam: 180 x 180 mm. | Hydraulic lifting device: cylinder 2 x elevator / 2 x inclination cylinder. | First year: 2009 | Last year: 2013

HILTI DD 100-W

• Fabricante: Hilti
• Modelo: DD 100

Voltage: 220 ~ 240V | Input power: 2,725 W | Input current: 15 A | Frequency: 50/60 Hz | 1st speed: 1200 rpm | 2nd speed: 2400 rpm | 3rd speed: 3900 rpm | Wet drilling: 1/2 ″ (half inch) 1.27 cm - to - 3 1/2 ″ (t...

2011 Volvo L110G TYRE LOADER

• Fabricante: Volvo
• Modelo: L110 G
• Horas: 13,008 hour

Km/h: 13.008 hours

2016 Caterpillar TYRE LOADER - 982M

• Fabricante: Caterpillar
• Modelo: 982M
• Horas: 12,448 hour

Horas: 12.448 | Motor: C 13 | Peso de trabajo: 35.700 kg

2017 TIRE LOADER CAT 950GC

• Fabricante: Caterpillar
• Modelo: 950GC
• Horas: 4,468 hour

Horas: 4468

2007 Caterpillar 950 H TYRE LOADER

• Fabricante: Caterpillar
• Modelo: 950H
• Caballos de potencia (CV): 197 horsepower
• Horas: 8,344 hour

Horas: 8.344 | Peso de trabajo: 18.500 kg

2008 Volvo L 180 F TYRE LOADER

• Fabricante: Volvo
• Modelo: L 180 F
• Horas: 12,050 hour

Km/h: 12.050

AEG KVT 2.80

• Fabricante: AEG

Speed: 1420 Rpm | Power: 2.2 KW COS Y 0.8 50 Hz | Volumen-strom / capacity: 80 m3 / h | Lubricant used in the pump: KLUBER LUBRICATION AMBLYGON TA 15/2 | Typ: AM 100 LS4 3 ~ MOT | Amps: 9.2 / 5.4 | Rpm: 1400 1 / ...

MECC ALTE

• Fabricante: Mecc Alte

Kva: 80 KVA | Rpm: 1500 rpm | Manufacturing country: ITALY

Deutz A2L 514

• Fabricante: Deutz
• Horas: 1,960 hour
• Tipo de combustible: diesel

Iten: Generator and Welding machine at the same time can carry welding cables over 30 meters long. Powerful and extremely smooth to weld, perfect welds almost look like you are welding with a semi automatic. | Ye...