Building Filters
POWER SUPPLY 3269
Compatible sensors: The CT6710, CT6711: up to 2 units The CT6700, CT6701, 3273-50, 3274, 3275 or 3276: up to 4 units Note: Also up to 4 units for the discontinued Model 3273 | Number of power supply connectors: 4...
Nagano, JapónPOWER SUPPLY 3272
Compatible sensors: The CT6700, CT6701: up to 2 units Note: When measuring the maximum peak current, only one unit The 3273-50, 3274, 3275 or 3276: up to 1 unit Note: May be used with up to 2 units of Model 3273 ...
Nagano, JapónCURRENT PROBE CT6701
- Fabricante: HIOKI E.E
Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Noise level: 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) | Continuous allowable input: 5 A rms (DC, and sine...
Nagano, JapónCURRENT PROBE CT6700
Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Noise level: 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) | Continuous allowable input: 5 A rms (DC, and sine ...
Nagano, JapónCURRENT PROBE CT6710
- Fabricante: HIOKI E.E
Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal 1...
Nagano, JapónCURRENT PROBE CT6711
- Fabricante: HIOKI E.E
Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal ...
Nagano, JapónSENSOR UNIT CT9555
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, JapónSENSOR UNIT CT9557
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, JapónSENSOR UNIT CT9556
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, JapónAC/DC CURRENT PROBE CT6843A
Rated current: 200 A AC/DC | Frequency bandwidth: DC to 700 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±600 A peak (Within 20 ms in an environment of 40°C/104°F or le...
Nagano, JapónAC/DC CURRENT PROBE CT6845A
Rated current: 500 A AC/DC | Frequency bandwidth: DC to 200 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1500 A peak (Within 20 ms in an environment of 40°C/104°F or ...
Nagano, JapónAC/DC CURRENT PROBE CT6846A
Rated current: 1000 A AC/DC | Frequency bandwidth: DC to 100 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1900 Apeak (Within 20 ms in an environment of 40°C/104°F or l...
Nagano, JapónAC/DC CURRENT PROBE CT6844A
Rated current: 500 A AC/DC | Frequency bandwidth: DC to 500 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±800 A peak (Within 20 ms in an environment of 40°C/104°F or le...
Nagano, JapónAC/DC CURRENT PROBE CT6841A
Rated current: 20 A AC/DC | Frequency bandwidth: DC to 2 MHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±60 A peak (Within 20 ms in an environment of 40°C/104°F or less)...
Nagano, JapónAC/DC CURRENT SENSOR CT6862-05
Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...
Nagano, Japón