Usado rolling mills

DMS No. ZR 22BBS52 SENDZIMIR COLD ROLLING MILL, 20HI

• Fabricante: Sendzimir

Material: High Carbon / Low carbon / Stainless Steel | Width of material........ 18": 52" (1320 mm) Max. | Material gauge: ........Entry | Coil o.d ................35.8" (910 mm): 72" (1830 mm) | Mill speed: 2500...

WATERBURY FARREL 12HI "SENDZIMIR" ZR19-25 COLD ROLLING MILL

• Fabricante: Waterbury Farrel

Material: BRASS LOW CARBON, COPPER | Nominal capacity: ZR 19-25 | Maximum incoming thickness: 0.118 (3.0mm) | Minimum finish thickness: 0.0078" (2.0mm) | Maximum coil weight: 6,000 KG | Speed range: 0-220m/Min. |...

44" TWO STAND UNITED 4HI TANDEM COLD ROLLING MILL

-mill design: TWO STAND | -mill stand configuration: 4HI | -drive configuration: WORK ROLL DRIVEN (BOTH STANDS) | -material: COLD ROLLED OR TINPLATE TEMPERED MATERIAL | -top mill speed: 5500 FPM | -coil id entry/...

56" (1422mm) HITACHI 5 STAND 6 HI CONTINUOUS TANDEM COLD ROLLING MILL

• Fabricante: Hitachi

Style: 5 Stand Tandem Mill | Mill stands: 35,872 HP (26,750 kW) | Current configuration: Tandem Mill with Flying Shear and Carousel Reel | Year: 1989 (Completely Rebuilt 2001 and Additional Upg...

40" x .0002" HUNTER FOIL ROLLING MILL

• Fabricante: Hunter

Anchura: 457MM - 1016MM | Ancho: 457mm: 1016MM | Thickness de entrada: 0.38MM | Grosor de entrada máximo/mínimo: 0.3MM/ 2MM X 0.007MM | Velocidad de línea: 730 MPM MAX | Peso máximo de la bobina: 2000 KG. | Face ...

14" EZTM MODEL CRTM 350 COLD ROLLING PILGER MILL, 2014

Outer diameter, mm: 140 - 342 | -outer diameter, mm: 180: 382 | Wall thickness, mm: 3 - 32 | -wall thickness, mm: 5: 40 | Length, m: 5 - 25 | -length, m: 2.5: 8.0 | Tube material ultimate resistance, mpa (max): 1...

SMS-DANIELI 26" LESS PIPE PIERCING AND PILGER ROLLING MILL LINE

• Fabricante: Danieli

64" (1625mm) 4HI Mesta/Danieli Hot Plate Reversing Mill, Completely Rebuilt

• Fabricante: Danieli

Excerpt from danieli survey report, 2018: "The Plate Mill equipment inspection | Infeed material thickness: 4" to 6" (101mm - 152mm) | Infeed material thickness: 4" to 6" (101mm: 152mm) | Maximum material width: ...

25" WATERBURY-FARREL, 2-HI SKIN PASS MILL

• Fabricante: Waterbury Farrel

Mill section: 2 HI | Mill type: NON REVERSING | Material: STAINLESS STEEL, CARBON STEEL | Maximum: 7,200 LBS/ 3,266 KG | Minimum: LBS/ - KG | Entry gauge maximum: 0.030IN/0.762MM | Exit gauge minimum: 0.003IN/0...

37" WATERBURY FARREL 2 HI SKIN PASS MILL

• Fabricante: Waterbury Farrel

Mill section: 2 HI | Mill type: NON REVERSING | Material: STAINLESS STEEL, CARBON STEEL | Maximum: 15,000LBS/6803.955366KG | Minimum: 9,900LBS/4490.610542KG | Entry gauge maximum: 0.125IN/3.175MM | Exit gauge min...

54" BLAW KNOX 4-HI ALUMINUM FOIL MILL

• Fabricante: Blaw-Knox