Building Filters
HORIBA Advanced Techno Co., Ltd. HE-960HC
- Fabricante: Horiba
Measurement range: 0 - 1000mS/cm | Wetted materials: GC, Karletz, PFA | Sensor input: 1 ch | Repeatability: +/- 0.5% of the full scale (in equivalent input) | Linearity: +/- 0.5% of the full scale (in equivalent ...
Kioto, Japón
HORIBA STEC, Co., Ltd. VG-200S
- Fabricante: Horiba
Response time: < 60msec | Operating temperatue *3: 10-50°C | Wetted materials: SUS316L | Output signal: 0-10VDC Load resistance: 10kΩ or more | I/o connector: D-Sub 15pin | 24vdc±5%, 2.4w max.: 24VDC±5%, 22W m...
Kioto, Japón
HORIBA France SAS EV 2.0 Series
- Fabricante: Horiba
System outline: The small sized spectrometer is based on a concave holographic grating (aberration corrected) with 20mm focal length (LR) or 75 mm focal length (STD, HR) or 99 mm focal length (HTR) and 50/25 µm s...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. HE-960H-TM-S
- Fabricante: Horiba
Model name: HE-960H-TM-S | Target of measurement: TMAH | Measurement range: Concentration: 0 - 3%, Conductivity: 0 - 1000mS/cm | Repeatability: Within +/- 0.003wt% (Temperature variation less than +/- 0.5℃, using...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. HE-960RW-GC(W)
- Fabricante: Horiba
Measurement range: 0.00 - 2.00 / 0.00 - 20.00 / 0.0 - 100.0 MΩ・cm | Ambient environment: Temperature: -5°C to 45°C, Relative humidity: 20% to 85% (without dew condensation) | Power supply: Rated voltage 24 V DC, ...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. HF-960M
- Fabricante: Horiba
Product name: Low Concentration Type HF / HCl / NH 3 Concentration Monitor | Measurement range: HF: 0 - 5000 ppm, HCl: 0 - 5000 ppm, NH 3 : 0 - 10000 ppm, Conductivity:0 - 50.0 mS/cm | Power supply: Rated voltage...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. HE-480R
- Fabricante: Horiba
Product name: Industrial resistance meter | Measurement method: Electrode type (2-electrode method) | Cell constant: 0.01 / cm | Temperature sensor specifications: Platinum resistance 1000 Ω / 0 °C | Repeatabilit...
Kioto, Japón
HORIBA STEC, Co., Ltd. Micropole System QL Series
- Fabricante: Horiba
Mass filter type: Qadrupole | Detector: Faraday cup | Measurement scan speed: 50 - 6400 ms/ m/z | Ionization voltage: 43eV or 70eV selectable | Operating temperature: 15 - 45°C | Operating humidity: 80%RH or...
Kioto, Japón
HORIBA, Ltd. EV-140C
- Fabricante: Horiba
Wavelength range: 200 - 800 nm | Optical resolution: <2.0 nm @ =200 - 500 nm <2.5 nm @ =500 - 700 nm (FWHM theoretical resolution) | Design: Aberration corrected Flat field concave grating | Focal length: 1...
Kioto, Japón
HORIBA France SAS LEM Series
- Fabricante: Horiba
System outline: LEM camera consists of a compact interference measurement section that includes the laser source, light receiver, and optical components, as well as the illumination and CCD imaging camera, allowi...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. HD-960L
- Fabricante: Horiba
Model name: HD-960L | 0.0 to 200.0 μg/l: +/-1% FS | 200 to 2000μg/l: +/-1% FS | 2.00 to 20.00mg/l: +/-1% FS | Sample flow rate: 15 to 200ml /min. | Sample temperature: 10 to 45 °C | Sample hf concentration: 0 to ...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. CS-900
- Fabricante: Horiba
Model name: Non-contact type chemical concentration monitor | Measurement method: Absorption spectroscopy | Concentration calculation: Temperature compensated multivariate analysis | Conditions of measurement: 1)...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. CS-600F
- Fabricante: Horiba
Measurement principle: Absorption spectroscopic method | Calculation principle: Temperature compensation type multivariate analysis | Measurement target: NH 3 /H 2 O 2 /H 2 O (reperesentative specification) * Ple...
Kioto, Japón
HORIBA Advanced Techno Co., Ltd. CS-100F1 Series
- Fabricante: Horiba
Measurement principle: Absorption spectrometry | Concentration computation principle: Temperature-compensated multivariate analysis | Sample solution temperature: 20 to 80: (when using Inline cell) 20 to 30: (whe...
Kioto, Japón
2018 DMG MORI SEIKI NHX5000 2ndGe (NHX51180314)
- Fabricante: DMG Mori
- Modelo: NHX 5000
Controlador: línea ERGO (M-730UM) | Tamaño de la mesa: cuadrado de 500 mm 2PL | Cono del husillo: BBT40 | Velocidad del cabezal: 15,000 rpm | Atc: 120 estaciones | Superficie requerida: 3,572 x 4,784 mm | Altura:...
Osaka, Japón