Usado table type en Pekín, China

KD800W CNC Wire Cut EDM Machine X×Y=630×800mm

KD700ZL-A CNC EDM Wire Cut Machine X×Y=550×700mm

KD400ZL-A CNC EDM Wire Cut Machine X×Y=320×400mm

KD1000W CNC EDM Wire Cut Machine X×Y=800×1000mm

KD500ZL-A CNC EDM Wire Cut Machine X×Y=400×500mm

Conventional single-phase overhead transformer

SmartII-maquina de corte plasma CNC-Columbia

• Fabricante: Columbia

Peso: 700KG | Ensamblaje: Difícil | Puesta en marcha: Difícil | Mantenimiento: Difícil | Precisión: 0.2mm | Desempeño: Excelente | Tipo de motor longitudinal: Individual | Frecuencia: 60/50 Hz | Nominal power: 20...

Plomada SF-3 y SF-4 CNC EDM con escalas ópticas

Name: SF-3 | Working table dimension(l×w): 600×400mm(granite) | X×y×z axis travel: 300×212×272mm | Working tank dimension(l×w×h）: 1000×600×400mm | Nivel más alto de líquido de servicio: 250mm | Max distance from ...

WMV680D Equine Anesthesia Machine-Large Animal

Gas source: O2.0.3--0.4Mpa | O2 flush: 25L/min- -75L/min | Airway pressure gauge: -20cmH2O--100cmH2O &-2Kpa--10Kpa | Apl valve: adjustable easily. range:0-60cmH20 | Tidal volume: 5000-15000ml

CNC Knife

• Fabricante: LIMAC

Cutting speed (cm/s): Maximum 60, average 35, Maximum 60, average 35, Maximum 60, average 35 | Cutting materials: Hard paper board, plastic board, white paper board, etc, Hard paper board, plastic board, white pa...

CNC Laser

Engraving area: 900 x 600mm (3' x 2') | Laser power: 40w/60w | Laser type: CO2 sealed laser tube,water-cooled,10.6um | Move speed: 0-60000mm/min (0-200'/min) | Engraving speed: 50-5000mm/min (0-16.7'/min) | Laser...

CNC Laser

Engraving area: 500 x 300mm (1.67' x 1') | Laser power: 60w | Platform: Knife table | Laser type: CO2 sealed laser tube,water-cooled,10.6um | Engraving speed: 0-54000mm/min (0-180'/min) | Laser output: 1-100%soft...

CNC Laser

Cutting area: 1300 x 900mm (4.3' x 3') | Laser power: 80w, 100w, 130w, 150w, 200w (GSI) | Laser type: Sealed CO2 Laser tube | Cutting speed: 0-24000mm/min (80'/min) | Repeatability: 0.05mm | Power supply: AC 110-...

CNC Laser

Cutting area: 1200 x 900mm (4' x 3') | Laser power: 80w, 100w, 130w, 150w, 200w (GSI) | Laser type: Sealed CO2 Laser tube | Cutting speed: 0-24000mm/min (0-80'/min) | Repeatability: 0.01mm | Power supply: AC 110-...

CNC Laser

Cutting area: 1200 x 800mm (4' x 2.67') | Laser power: 60W | Laser type: Sealed CO2 Laser tube | Cutting speed: 0-60000mm/min (0-200'/min) | Repeatability: 0.01mm | Power supply: AC 110-220V/50-60HZ | Operating t...