Usado tester en Nagano, Prefectura de Nagano, Japón

IN-CIRCUIT TESTER FA1220-11

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

INSULATION TESTER IR4056

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

INSULATION TESTER IR4057-50

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

FLYING PROBE TESTER FA1240-6x

• Fabricante: HIOKI E.E

Number of arms: 4 (L, ML, MR, R) | Number of test steps: 40,000 (max.) | Measurement ranges: Resistance: 400 μΩ to 40 MΩ Capacitance: 1 pF to 400 mF Inductance: 1 μH to 100 H Diode VZ measurement: 0 to 25 V Zener...

TEST FIXTURE IM9202

Frequency range: DC to 600 MHz | Measurable dut: LEADED Axial • Distance between leads (component length): 1 mm to 25 mm (0.04 in. to 0.98 in.) • Lead length: 2 mm to 10 mm (0.08 in. to 0.39 in.) • Height to lead...

BYPASS DIODE TESTER FT4310

Measurement items: Bypass diode comparator judgment, Bypass route resistor, Open-circuit voltage, Short-circuit current, Measurement (applied) current | Measurement object: Crystal system string Open-circuit volt...

SMD TEST FIXTURE IM9201

Frequency range: DC to 3 GHz | Dimensions of　measurable dut: 0201, 0402, 0603, 0805, 1206, 1210 (inch) | Electrode structure: 2-terminal connection to bottom electrodes | Maximum voltage: ±42 Vpeak (AC+DC) | Addi...

POWDER IMPEDANCE MEASUREMENT SYSTEM

Frequency at which measurements can be made: DC to 5 MHz (Three types of measuring instruments used) | Load application method: Manual operation (constant control of load is not possible) | Load range (compressin...

FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780

Included: Installation CD, license key (USB), instruction manual (× 1 each) *Caution: Computer, monitor, and other hardware not included. | Gerber data input functions: Loading of Gerber files (RS-274X, RS-274D),...

EARTH TESTER FT6031-50

• Fabricante: HIOKI E.E

Measurement system: Two-electrode method/three-electrode method (switchable) | Measurement range: 20 Ω (0 Ω〜20.00 Ω) | Accuracy: ±1.5% rdg ±8 dgt | Earth voltage: 0〜30.0 V rms Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60...

ANALOG EARTH TESTER FT3151

• Fabricante: HIOKI E.E

Measurement system: AC potentiometer method, Three-electrode method/ two-electrode method (switchable) Measuring frequency: 575 Hz/ 600 Hz Measurement current: Three-electrode method: 15 mA rms or less; Two-elect...

BATTERY IMPEDANCE METER BT4560-60

Allowable input voltage: Up to 5 V | Measured items: Impedance, voltage, temperature | Impedance measurement: Parameters: R (resistance), X (reactance), Z (impedance), θ (phase angle) Frequency: 0.01 Hz to 10.00 ...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

CLAMP ON EARTH TESTER FT6380-50

• Fabricante: HIOKI E.E

Measurement principle: Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi groun...

ANALOG MΩ HiTESTER IR4018

• Fabricante: HIOKI E.E

Rated output voltage: 1000 V DC | Effective maximum indicated value: 2000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 2 M to 1000 MΩ | Lower limit resistance: 1 MΩ (measurement resistance v...