Usado variable speed en Massachusetts, USA

ConMed Linvatec Hall 6021-026 Orthopedic MicroPower High Speed Drill

• Fabricante: ConMed

Watson Marlow Peristaltic Pump 720DU

• Fabricante: Watson Marlow

Control type: Digital Variable Speed | Minimum rpm: 0.1 | Maximum rpm: 300 | Speed control: 0.1 rpm | Maximum flow rate: 8.8 GPM (2,000 L/hr) | Reversible motor: Yes | Dimensions: 11x21x12” | Weight: 59 lbs | Ele...

Watson Marlow Peristaltic Pump 730

• Fabricante: Watson Marlow

Control type: Digital Variable Speed Fieldbus automated control capabilities (730DuN only) | Speed range: 0.1 to 360rpm | Speed control: 0.1 rpm increments | Speed control ratio: 3600:1 | Maximum flow rate: 8.8 g...

PHCbi VIP ECO Ultra Low Freezer

• Fabricante: PHCbi

Temperature control range: -50°C to -86°C in 1° increments (center of chamber, ambient temperature 30°C, no load) | Capacity: 18.6 cu.ft. (528 L) | Internal dimensions: 24x23x55″ | Storage: 384 Boxes 2”/51 mm Fib...

Benchmark Incu-Shaker Incubator Shaker

• Fabricante: Benchmark
• Modelo: Incu-Shaker

Speed: Variable, 30 to 300 rpm | Speed increment: 1 rpm | Orbit: 19mm / 3/4 in. | Temp. range: Room Temp. +5 to 70°C | Temp. increment: 0.1°C | Temp. accuracy: +/- 0.1°C | Temp. uniformity: +/- 0.25°C | Timer: 1 ...

Masterflex I/P Pump

• Fabricante: Cole-Parmer
• Modelo: Masterflex

Ip rating: IP55 | Control type: Digital Variable Speed | Min rpm: 33 | Max rpm: 650 | Speed: Variable | Speed control: ±0.25% | Max flow rate: 26000 ml/min | Reversible motor: Yes | Digital dispensing: Yes | No. ...

Cole Parmer Masterflex L/S Peristaltic Pump

• Fabricante: Cole-Parmer
• Modelo: Masterflex

Control type: Digital Variable Speed | Min rpm: 0.1  rpm (07522-20) 0.1  rpm (07522-28) 0.1 rpm (07523-80) 0.2  rpm (07551-30) 1 rpm (07528-30) | Max rpm: 600 rpm (07522-20) 600 rpm (07522-28) 600 rpm (07523-80) ...

VWR Laboratory Refrigerator – 2023

• Fabricante: VWR

Capacity: 651 L (23 cu.ft.) | Temperature range: 1-10 °C | Interior: 22x26x52” | Exterior: 27x35x80” | Power: 115v, 3amp, 60Hz,1/5 hp

Fisher Microplate Shaker

Speed: 150 to 1000 rpm | Orbit: 2.5mm (0.1 in.) | Timer: 0 min to 99h 59 min with automatic switch-off | Platform dimensions: 9 x 10” | Capacity: 4 microplates | Dimensions: 12x16x5” | Power: 100-240v, 50/60hz, 7...

Thermo MaxQ 6000 Incubator Shaker

• Fabricante: Thermo Fisher Scientific
• Modelo: MaxQ 6000

Load capacity: 35 lbs | Internal dimensions: 21 x 20 x 26” | Temperature range: Ambient +5°C to 80°C | Speed range: 15 – 500 rpm   ±1 (if stacked max speed is 300RPM) | Orbit diameter: 1.9 cm (0.75 in.) | Max loa...

Thermo MaxQ 4000 Incubator Shaker

• Fabricante: Thermo Fisher Scientific
• Modelo: MaxQ 4000

Speed range: 15 to 500rpm | Timer: Continuous, timed .01-999hours or 0.1- 999 minutes | Temperature range: Ambient plus 10°C to 60°C | Temperature accuracy: +/- 0.1°C | Maximum load capacity: 50lbs, Six 2L flasks...

Thermo Savant SPD121P SpeedVac Concentrator

• Fabricante: Thermo Fisher Scientific
• Modelo: SPD121P

Capacity: 120 x 1.5/2.0ml tubes | Power: 115V 50/60Hz | Dimensions (w x d x h): 14x17x13” | Weight: 31 lbs

Thermo Scientific Thermal Mixer

• Fabricante: Thermo Fisher Scientific

Temperature setting range: 4°C to 100°C | Temperature control range: 15°C below ambient to +100°C | Temperature uniformity over block: At 4°C ±0.6°C/ at 37°C, ±0.1°C/ at 100°C ±0.3°C | Average heat up speed: 5°C/...

Bio Rad PX1 PCR Plate Sealer

• Fabricante: Bio-Rad

Heat up time: ＜3min | Temperature range: 100–190°C, off | Time range: 0.5–10.0 seconds | Dimensions: 8x10x9” | Weight: 12 lbs | Power: 100-240vac, 50/60Hz, 840W

LulzBot Bio FRESH 3D Printer – Unused Still in Box

• Fabricante: Still

Technology: Fluid Deposition Fabrication (FDF) | Tool head: Syringe Pump Extruder (compatible with 2.5mL, 5mL, and 10mL) | Min. layer resolution: 0.05 mm (50 μm) | Min. positive feature size: 0.08 mm (80 µm) | Xy...