Usado compressore en Tokio, Japón

Compressor Kobelco AS2PD-5

• Fabricante: コベルコ・コンプレッサ(株)

Identificación del producto: 991011MIT-10 | Fabricante: Kobelco Compressor Corporation | Año del modelo: 2011 | Especificación: 1.5 kW 3 fases 200 V (50 Hz)/200 0.69～0.83 MPa Entrega de aire: 0.160 m³/min

Yamato GAS410

• Fabricante: Yamato
• Modelo: GAS410

Solvent recovery system: Capacitor + freezer | Circulating gas: N2 gas (sealed circulation when connected to ADL311SA or GB-210A) | Circulating volume flow: 0.12 to 0.65m3/min | Compressor (for spraying): Linear ...

2016 Hitachi PB-075PSC5

• Fabricante: Hitachi

Hitachi SP-5T4

• Fabricante: Hitachi

Hitachi PB-1.5P

• Fabricante: Hitachi
• Modelo: PB-15P

Anest Iwata CSD-15P

• Fabricante: Anest Wakata

Anest Iwata CSD-07P

• Fabricante: Anest Wakata

1992 Toshiba CP5-7T9

• Fabricante: Toshiba

2005 Toshiba KLP7D-4T1

• Fabricante: Toshiba

Annestave Wada CLD 15 B - 8.5

• Fabricante: Anest Wakata

Yamato ADL311S-A

• Fabricante: Yamato

Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1°C | Drying air amount adjusting range: 0 to 0.7m3/min | Sp...

Yamato ADL311-A

• Fabricante: Yamato

Temp. adjusting unit setting range: 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1deg.C | Drying air amount adjusting range: 0〜0.7m3/mi...

Yamato GB210-A

• Fabricante: Yamato

Temp. adjusting range: 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1°C | Spraying system: Two-way nozzle, Nozzle No. 1A as standard | Drying...

PW-5600LLPackingWeighing & Labeling

Packaging option: MAP, VSP, Sealing | Function: Front infeed, left or right outfeed | Vacuum pump: 100m3/h, Oxygen pump | Compressor: External | Power supply: AC220V/110V 50/60Hz | Power consumption: 660W | Gas c...

Yamato GB210-B

• Fabricante: Yamato

Temp. adjusting range: 40 to 220°C (inlet temperature), 0 to °60(Outlet temperature) | Temperature adjusting accuracy: Inlet temperature ± 1°C | Spraying system: Two-way nozzle, Nozzle No. 1A as standard | Drying...