Nuevo Construcción en Nuevo León, México

KFD 14

Características: KFD 14 | Distancia entre dos columnas: 55″ | Tamaño de la mesa: 79"-118" X 47" | Desplazamientos: 87"-126" x 5.1" x 31.5" x 31.5" | Velocidad del cabezal: 6000 RPM | Cono del husillo: BBT-50

JY VH550

Characteristics: JY VH550 | Size of the table: 19.7″ X 75″ | Longitudinal displacement (x-axis): 51.2″ | Transverse displacement (y-axis): 35.4″ | Vertical displacement (z-axis): 31.5″ | T-slot: 0.71″x0.12″x3.15″...

KTM 3VS

Characteristics: KTM 3VS | Size of the table: 9″ x 49″ (optional 9″x42″) | Longitudinal displacement (x-axis): 35″ (31″ with CNC control) (optional 28″/24″) | Transverse displacement (y-axis): 12″ (11″ with CNC c...

JY VH780

KTM 3VSF

KLS 2280C

Characteristics: KLS 2280C | I turn over the bench: 22 ″ | Turning on the cross slide: 12.5″ | I turn over the neckline: 30 ″ | Width of the bed: 16 " | Distance between points: 80″ | Cross travel: 0.21″ | Auxili...

KLS 1440

Characteristics: KLS 1440 | I turn over the bench: 14 " | Turning on the cross slide: 8-5/8″ | I turn over the neckline: 20″ | Width of the bed: 8-1/8″ | Distance between points: 40″ | Cross travel: 7″ | Auxiliar...

W 1832SR

Characteristics: W 1832SR | Capacity (90°): 18.1″ 18.1″ 18.1″ x 32.3″ | Capacity (r45°): 18.1″ 18.1″ x 19.7″ | Capacity (r60°): - | Capacity (l45°): 18.1″ 18.1″ 18.1″ x 19.7″ | Capacity (l60°): 13″ 12.2″ | Saw mo...

JY VH650B

Characteristics: JY VH650B | Size of the table: 24″ X 87″ | Longitudinal displacement (x-axis): 67″ | Transverse displacement (y-axis): 41.3″ | Vertical displacement (z-axis): 37.4″ | T-slot: 0.98″x0.2″x4.92″ | F...

KTM 3VK

SGS-816M/MR

Characteristics: SGS-816M/MR | Working capacity: 8″ x 16″ | Longitudinal displacement of the table: 17″ | Table traversing: 8.25″ | Slots t: 1 x 9/16″ | Engine power: 2 HP | Speeds: 3500 RPM | Stone size: 8″ x 1/...

KFD 21

Características: KFD 21 | Distancia entre dos columnas: 85″ | Tamaño de la mesa: 79”–197” X 71” | Desplazamientos: 87”–205” X 83” X 43.3” | Velocidad del cabezal: 6000 RPM | Cono del husillo: BBT-50

KVR 1218

Characteristics: KVR 1218 | Displacement: 48 X 27 X 24 | Spindle speed: 8000 RPM | Spindle cone: CT-50 | Size of the table: 59 X 24

KVR 4020A

KLMY 300

Características: KLMY 300 | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10