Usado Taladros De Columna

Jet JDP-20MF, 20-Inch Floor Drill Press, 1-1/2 HP, 1Ph 115/230V

Upc: 6.63E+11 | Weight: 282 lbs. | Shipping: $170.00 (Fixed Shipping Cost) | Model number: JDP-20MF | Drilling capacity cast iron: 1 in. | Drilling capacity mild steel: 3/4 in. | Column diameter: 3-3/8 in. | Dril...

Jet J-2500, 15" Floor Model Drill Press 115V 1Ph

Upc: 6.63E+11 | Peso: 167.00 LBS | Envío: $150.00 (Costo fijo de envío) | Número de modelo: J-2500 | Taladros al centro del círculo: 15 | Capacidad de taladrado en hierro colado (máx./pulg.): 5/8 | Capacidad de t...

Jet J-A3816, 15" 6-Speed Floor Model Drill Press 115/230V 1Ph

Upc: 6.63E+11 | Weight: 394 lbs. | Shipping: $205.00 (Fixed Shipping Cost) | Model number: J-A3816 | Drilling capacity cast iron: 5/8 in. | Drilling capacity mild steel: 1/2 in. | Column diameter: 3 in. | Distanc...

Jet J-2550, 20" Floor Model Drill Press 115V 1Ph

Upc: 6.63E+11 | Weight: 304.00 LBS | Shipping: $170.00 (Fixed Shipping Cost) | Model number: J-2550 | Drills to center of circle: 20 | Cast iron drilling capacity (max./in.): 3/4 | Steel drilling capacity (max./i...

Jet J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1Ph

Upc: 6.63E+11 | Weight: 388.00 LBS | Shipping: $225.00 (Fixed Shipping Cost) | Model number: J-A5816 | Drilling capacity cast iron: 5/8 in. | Drilling capacity mild steel: 1/2 in. | Column diameter: 3 in. | Dista...

JET 15" Step Pulley Drill Press- Bench Top

Upc: 6.63E+11 | Peso: 163.00 LBS | Envío: $125.00 (Costo de envío fijo) | Número de modelo: J-2530 | Taladros al centro del círculo: 15 | Capacidad de taladrado en hierro colado (máx./pulg.): 5/8 | Capacidad de t...

Linmac RF-40S2F

• Fabricante: Linmac

Drilling capacity: Ø 40 mm (1-1/2”) | Motor drive: 1hp 230 V, 3 Phase | Speed (standard): 55 – 1260 rpm, 6 speeds (1 speed motor) | Spindle taper: MT3 | Stroke: 107 mm | Depth: 260 mm | Table size: 555 x 495 mm |...

Jet GHD-20, 20" Gear Head Drill Press

Upc: 6.63E+11 | Weight: 698.00 LBS | Shipping: $350.00 (Fixed Shipping Cost) | Style (type): Geared Head | Drills to center of circle (in.): 20 | Drilling capacity cast iron (in.): 1-1/2 | Drilling capacity mild ...

TPR C2500

Characteristics: TPR C2500 | Maximum drilling diameter: 3.94″ Castings 3.15″ Steel | Distance between column and spindle shaft: Maximum 98.4″. Minimum 19.68″. | Distance between spindle end and chuck base worktab...

TPR 920A

Characteristics: TPR 920A | Maximum drilling diameter: 1.97″ Castings 1.25″ Steel | Distance between column and spindle shaft: Maximum 37.4″. Minimum 8.7″ | Distance between spindle end and chuck base worktable: ...

TPR 1230H

Characteristics: TPR 1230H | Maximum drilling diameter: 2.16″ Castings 1.65″ Steel | Distance between column and spindle shaft: Maximum 46″ Minimum 13.4″ | Distance between spindle end and chuck base worktable: M...

TPR 1600H

Characteristics: TPR 1600H | Maximum drilling diameter: 2.75″ Castings 2.55″ Steel | Distance between column and spindle shaft: Maximum 63″ Minimum 13.7″ | Distance between spindle end and chuck base worktable: M...

TPR 2000H

Characteristics: TPR 2000H | Maximum drilling diameter: 2.75″ Castings 2.55″ Steel | Distance between column and spindle shaft: Maximum 78.7″. Minimum 19.3″ | Distance between spindle end and chuck base worktable...

TPR 720A

Characteristics: TPR 720A | Maximum drilling diameter: 1.97″(50mm)Castings 1.25″(32mm)Steel | Distance between column and spindle shaft: Maximum 29.5″ (750 mm) Minimum 8.7″(220mm) | Distance between spindle end a...

TLR-134 TALADRO RADIAL, 19" COLUMNA X 72" BANDERA, MARCA CARLTON

• Fabricante: Carlton