Usado controller

Purlin Roll Forming Machine - Automatic - CZ300 - 3 punching stations

Dimensions (d x r x c): 14600 mm x 1700 mm x 1600 mm | Productivity / rolling speed (m / p): 18 m / p ÷ 20 m / p (Or faster depending on request) | Chassis: I # 396 | Machine wall (mm): 43 mm | Cutting board: Hig...

Purlin Roll Forming Machine - C200 - 1 punching station | 2 punching stations | 3 punching stations

Dimensions (d x r x c): 8500 mm x 1400 mm x 1500 mm | Productivity / rolling speed (m / p): 18 m / p ÷ 22 m / p | Roller diameter (mm): Ø70 mm | Mass (kg): 8000 Kg | Electric power (kw / hp): 15 KW / 20 HP | Pair...

Light Roll Forming Machine - C75 | C100

Dimensions (d x r x c): 5800 mm x 1200 mm x 1300 mm | Weight / kg): 3000 Kg | Productivity / speed (m / p): 16 m / p ÷ 20 m / p (Or faster depending on request) | Number of shaft pairs: 12 Pair | Roller diameter ...

Automatic 2 Wire 3 Terminal Crimping Machine SR-3303

Garantía de la máquina: 1 año | Potencia: AC220V 2.5KW | Fuente de aire: 0.5-0.6MPa (stable, clean and dry air) | cable aplicable: 28-14AWG | Longitud de corte: 55-9900mm (Support customize) | Longitud de desbas...

Bozwang BZW-6C Hexagonal Terminal Crimping Machine (6–120 mm²)

• Fabricante: Bozwang

Cable range: 6–120 mm² (Min: AWG10, 240 mm² customizable) | Crimping force: 200 kN | Max. terminal diameter: 32mm | Crimping width: 12.5 mm (customizable) | Power supply: 220 V, 50/60 Hz | Motor power: 2300 W | W...

Bozwang BZW-5C Hexagon shape terminal crimping machine for small cable（35mm²）

• Fabricante: Bozwang

Cable range: 2.5–35 mm² (AWG2#–AWG13#), 0.5–10 mm² (customizable) | Crimping force: 80 kN | Max. terminal diameter: 24 mm | Crimping width: 9 mm (customizable) | Power supply: 220 V, 50/60 Hz | Motor power: 1500 ...

Five wires single end crimping machine

5.servo: MITSUBISHI

Perfect Laser PEC-100

• Fabricante: Perfect Laser

Device name: Blade Bending Machine | Feeding accuracy: ±0.3mm | Maximum bending angle: 110° | Motor: Feeding, bending:Japan imported servo motor, 400W x 2Bridge: 750W x 1 | Rail screw: Taiwan TPI | Blade size: Th...

Hex flange nut tapping machine M5

Spindle: 4 | Hex output(pcs/min): 210 | Flange output(pcs/min): 150 | Power of mine motor(kw): 0.75-4 | Mixing motor power (kw): 0.55 | Pump power(kw): 0.25 | Pressure(pressure(kg/cm2)): 2-3 | Demension l*w*h(mm)...

Hex flange nut tapping machine M18-M20

Spindle: 4 | Hex output(pcs/min): 75 | Flange output(pcs/min): 55 | Power of mine motor(kw): 2.2-6 | Mixing motor power (kw): 0.75 | Pump power(kw): 0.25 | Pressure(kg/cm2): 4-5 | Demension l*w*h(mm): 1750x2100x1...

Hex flange nut tapping machine M10-M12

Spindle: 4 | Hex output(pcs/min): 150 | Flange output(pcs/min): 110 | Power of mine motor(kw): 1.5-4 | Mixing motor power (kw): 0.55 | Pump power(kw): 0.25 | Pressure(kg/cm2): 3-4 | Demension l*w*h(mm): 1500x1900...

MD-02P Semi-automatic Ribbon Cable Terminal Crimping Machine

1.mainly used for crimping: PH, XH, EH, ZH y otros cables de comunicación de ensayo/rehearsal para arneses terminales, SCN, SM, VH, DuPont y otros conectores en tira con terminales de cable | 5.less land occupati...

ZHOUXIANG W11HNC | NC Hydraulic Plate Rolling Machine | 12mm x 2000mm | 2011

APM ACP Series Hydraulic Pressbrake / Bending Machine

• Fabricante: APM

"Sunfluid" Hydraulic Press Brake / Bending Machine