Usado Máquinas Rectificadoras Cilíndricas en Nueva Jersey, USA

1991 Tschudin HTG-310, 1991, RISERS, FULL AUTO CYCLE

• Fabricante: Tschudin
• Modelo: HTG 310

Con 2" risers de fábrica: 11.8" | Altura de centro, con risers: 5.9" | Distancia entre centros: 13.4" | Radio de giro: 360° | Tamaño de la rueda: 14"DIÁM. x 2"ANCHO x 5" Ø | Motor: 4 HP | Aproximación rápida: 1-1...

2017 Supertec G38P-100NC, 2017, CONTROL PLC AUTO CICLO, HYD. TAPA

• Fabricante: Supertec

Distancia entre centros: 40" | Balanceo sobre la mesa: 15.7" | Diámetro máx. de rectificado: 14" | Carga máxima sostenida entre centros: 330 lbs | Alimentación incremental automática (nc): 0.0001" ~ 0.0999" | Vol...

2014 Ecotech MQ1350x3000, 2014, 2,200 Lbs. cc,, 30" x 3"W Wheel

• Fabricante: Ecotech

1970 Brown & Sharpe 1440U, SWING, I.D., AUTO INFEED

• Fabricante: Brown & Sharpe

Nominal swing: 14" | Nominal size with the factory risers: 21" | Distance between centers, nominal: 40" | Distance between centers, maximum: 43-3/4" | Scales for angular setting: 11° BACK | Taper per foot: 5" BAC...

1998 Tschudin HTG-310, 1998, AUTO CYCLE,MARPOSS GAGEI,

• Fabricante: Tschudin
• Modelo: HTG 310

Balanceo sobre la mesa: 8" | Distancia entre centros: 13.4" | Velocidad de la mesa: 0 TO 195" IPM | Radio de giro: 360 GRADOS | Tamaño de la rueda: 14"DIA. X 2"W X 5"BORE | Motor: 4 HP | Aproximación rápida: 1-1/...

2017 Supertec G38P-60NC, 2017, CICLO AUTOMÁTICO PLC, MESA HIDRÁULICA

• Fabricante: Supertec

Modelo g38p-60nc    s/n: 6C17006     NUEVO | Distancia entre centros: 24" | Balanceo sobre la mesa: 15" | Diámetro máx. de rectificado: 14" | Carga máxima sostenida entre centros: 330 lbs | Recorrido de alimentac...

1982 Kellenberger 600U, 1982, RISERS, I.D. ATT., AUTO CYCLE,

• Fabricante: Kellenberger
• Modelo: 600U

Max. swing w/4" factory risers: 17.8" | Distance between centers (nominal): 23- 5/8" | Overhanging: 29- 1/2" | Longitudinal table travel: 35- 7/16" | Coarse: 0.8" | Fine: 0.04" | Longitudinal table speed (hydraul...

1992 Tos BUAJ 28-630, 1992, HYD. TABLE, 16" WHEEL

• Fabricante: TOS

Model bu28/630     s/n: 129015     NEW | Max. grinding diameter: 11" | Distance between centers: 25" | Between centers: 276 LBS. | Workhead spindle taper: #4 MT | (12) speed choices, from: 22.4 TO 710 RPM | Swive...

1963 Tschudin HTG-600, 1963, SWISS, ALL ORIGINAL SURVIVOR,

• Fabricante: Tschudin
• Modelo: HTG 600

Maximum swing over table: 8" | Nominal distance between centers: 24" | Maximum table travel: 24-1/2" | Toward wheelhead: 7° | Away from wheelhead: 4° | Grinding wheel diameter: 12" | Grinding wheel width, maximum...

1955 Brown & Sharpe No. 1, 521-1-272, I.D. ATT., CHUCK, ACCESSORIES,

• Fabricante: Brown & Sharpe

** nota especial: ESTA MÁQUINA FUE ORIGINARIAMENTE PROPIEDAD | Balanceo sobre la mesa: 10" | Distancia entre centros, nominal: 20" | Distancia entre centros, máximo: 22-3/4" | Motor de muela: 2 HP | Velocidades d...

1984 Kellenberger 1000U, 1984, I.D. ATTACH., FULL AUTO CYCLE,

• Fabricante: Kellenberger
• Modelo: 1000U

Distance between centers: 39- 3/8" | Overhanging: 47- 1/4" | Height of centers, with removable risers: 9- 27/32" | Standard swing without risers: 9.8" | Max. swing with factory risers: 19.625" | Longitudinal tabl...

1978 Brown & Sharpe 814 U VALUEMASTER, I.D. ATT., I.D. SPINDLE,

• Fabricante: Brown & Sharpe

- grinds work up to: 8" DIAMETER | - grinds length: 14" | - distance between centers: 24" | - grinding wheel size: 5", 7" OR 10" DIAMETER | - grinding wheel speeds (3): 2500, 3600 & 5150 RPM | - wheelhead travel:...

1982 Toyoda GUP40-180, 1982, HEAVY CAPACITY, FULL AUTO CYCLE

• Fabricante: Toyoda

Max. swing over table: 19.685" | Distance between centers: 71" | Max. load between centers: 1,100 LBS. | Table swivels, ccw/cw: 8° CCW/3°CW | Longitudinal table traverse speed: 2" TO 157" IPM | Movement per turn ...

1973 Tacchella 612U, NEW 1973,

• Fabricante: Tacchella
• Modelo: 612 U

Maximum swing over table: 10" | Distance between centers: 24" | Workpiece between centers: 176 LBS. | Max. table travel: 24" | Manual, one rev. of handwheel =: 0.157" | Hydraulic traverse speed: 4" TO 276" I.P.M....

1985 Shigiya GUA-30.60

• Fabricante: Shigiya
• Modelo: GUA-3060

Columpio: 11.8" | Distancia entre centros: 24" | Velocidad de la mesa longitudinal: 2" A 160" IPM | Tabla giratoria (total): 30 GRADOS | Recorrido máximo de la cabeza de husillo (manual): 6.9" | Avance rápido (hi...