Nuevo Tornos Cnc

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17��� | Turning on the cross slide: 10-7/8��� | Distance between points: 37��� | Width of the bed: 12��� | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole thro...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7��� | Turning on the cross slide: 11.8��� | Distance between points: 40��� / 60��� / 80��� / 120��� | Width of the bed: 13.58��� | Spindle nose: ASA A2-...

CSC 18 SERIES

CHL 21 SERIES

KVT 100E

Características: KVT 100E | Diámetro máximo de giro: 39.3 | Longitud máxima de giro: 27.5 | Diámetro máximo de vuelco: 43.3 | Nariz del husillo: A2-11

KLM 200S

Characteristics: KLM 200S | Secondary spindle: YES | Maximum turning diameter: 10.2 | Maximum turning length: 19.5 | Spindle through hole (main / secondary): 2.04 / 1.77 | Chuck (main / secondary): 8 / 6

KLR 300

KLS 1860V

Characteristics: KLS 1860V | I turn over the bench: 18��� | Turning on the cross slide: 10.8��� | I turn over the neckline: 27.5��� | Width of the bed: 13��� | Distance between points: 60��� | Cross travel: 11���...

MD 70

MD 55

Characteristics: MD 55 | Height of centers: 27.5��� | I turn over the bench: 55��� | Turning on the cross slide: 40��� | Width of the bed: 32��� | Distance between points: 80��� ��� 320��� | Spindle edge diameter...

MD 63

HL 37

Characteristics: HL 37 | I turn over the bench: 37.8��� | Turning on the cross slide: 24.2��� | I turn over the neckline: 54-3/8��� | Width of the bed: 24��� | Distance between points: 120��� (Opt 80��� / 160��� ...

HR 35

Characteristics: HR 35 | I turn over the bench: 34.6��� | Turning on the cross slide: 25.2��� | I turn over the neckline: 46��� | Width of the bed: 19��� | Distance between points: 120��� (Opt 80��� / 160��� / 20...

HW 30

ML 1740T

Characteristics: ML 1740T | I turn over the bench: 17��� | Turning on the cross slide: 11��� | I turn over the neckline: 24.5��� | Width of the bed: 12��� | Distance between points: 44��� | Cross travel: 12��� | ...