Nuevo Tornos Cnc

Torneado CNC Schaublin 225 TM-CNC

• Fabricante: Schaublin
• Modelo: 225TM-CNC

Torneado CNC Schaublin 860

• Fabricante: Schaublin
• Modelo: 860 CNC

Torneado CNC Schaublin 842

• Fabricante: Schaublin
• Modelo: 842

Torneado CNC Schaublin 965-Y

• Fabricante: Schaublin
• Modelo: 965-Y

Torneado CNC Schaublin 942-Y

• Fabricante: Schaublin
• Modelo: 942-Y

Torneado CNC Schaublin 632-Y

• Fabricante: Schaublin
• Modelo: 632-Y

Torneado CNC Schaublin 125-CCN

• Fabricante: Schaublin
• Modelo: 125CCN

Torneado CNC Schaublin 180-CCN

• Fabricante: Schaublin
• Modelo: 180CCN

Centro de rectificado y torneado Schaublin 302.0

• Fabricante: Schaublin
• Modelo: 302

Centro de rectificado y torneado Schaublin 202 TG

• Fabricante: Schaublin
• Modelo: 202 TG

CRL 1640 CNC

Characteristics: CRL 1640 CNC | I turn over the bench: 16 " | Turning on the cross slide: 9.05″ | Distance between points: 35″ | Width of the bed: 10.23″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole throug...

CSM 1440 CNC

Characteristics: CSM 1440 CNC | I turn over the bench: 14 " | Turning on the cross slide: 8-5/8″ | Distance between points: 40″ | Width of the bed: 8.1″ | Spindle nose: Camlock D1-4 (Opt. ASA A1-4) | Hole through...

KLS 1840N

Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....