Nuevo Motores Industriales en Nuevo León, México

MD 100

• Caballos de potencia (CV): 2 horsepower

Characteristics: MD 100 | Height of centers: 49″ | I turn over the bench: 100″ | Turning on the cross slide: 81″ | Width of the bed: 52″ | Distance between points: 120″ - 480″ | Spindle edge diameter: Ø 9″ (Opt. ...

MD 80

• Caballos de potencia (CV): 2 horsepower

Characteristics: MD 80 | Height of centers: 39″ | I turn over the bench: 80″ | Turning on the cross slide: 61 ″ | Width of the bed: 52″ | Distance between points: 120″ - 480″ | Spindle edge diameter: Ø 9″ (Opt. Ø...

TW 40QI

• Caballos de potencia (CV): 7.5 horsepower

Characteristics: TW 40QI | Size of the table: 18″ X 59″ | Longitudinal displacement (x-axis): 40″ (38″ with control) | Transverse displacement (y-axis): 21″ (20″ with control) | Vertical displacement (z-axis): 22...

KVR 1218

Características: KVR 1218 | Desplazamiento: 48 X 27 X 24 | Velocidad del cabezal: 8000 RPM | Cono del husillo: CT-50 | Tamaño de la mesa: 59 X 24

KLMY 300

Características: KLMY 300 | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10

KLS 26120C

Characteristics: KLS 26120C | I turn over the bench: 26″ | Turning on the cross slide: 16.5″ | I turn over the neckline: 34″ | Width of the bed: 16 " | Distance between points: 120″ | Cross travel: 12.2″ | Auxili...

KLS 2660N

Characteristics: KLS 2660N | I turn over the bench: 26″ | Turning on the cross slide: 9.05″ | Distance between points: 59″ | Width of the bed: 15.9″ | Spindle nose: D1-8 (Opt. ASA A1-8) | Hole through the spindle...

KUM HU 250

Characteristics: KUM HU 250 | Work surface: 43.3″ X 9.8″ | Maximum permissible load: 661 LBS | Number of slots t: 3 | Slot width t: 0.63″ | Distance between slots t: 2.36″ | Maximum table rotation: ± 45 ° | Longi...

CS 2280

Characteristics: CS 2280 | I turn over the bench: 22 ″ | Turning on the cross slide: 14.2″ | I turn over the neckline: 20.7″ | Width of the bed: 13.2″ | Distance between points: 86.5″ | Cross travel: 10.2″ | Auxi...

KVR 4020A

Characteristics: KVR 4020A | Displacement: 40 X 20 X 20 | Spindle speed: 10000 RPM | Spindle cone: CT-40 | Size of the table: 43 X 20

KFD 21

Características: KFD 21 | Distancia entre dos columnas: 85″ | Tamaño de la mesa: 79”–197” X 71” | Desplazamientos: 87”–205” X 83” X 43.3” | Velocidad del cabezal: 6000 RPM | Cono del husillo: BBT-50

COMPRESOR