Usado Tornos Cnc en México

Torno CNC Doble Husillo Miyano

• Fabricante: Miyano

Torno CNC WNCL – 20 FEMCO

• Fabricante: Femco

TORNO CNC Millano BNC-12

• Fabricante: Miyano
• Modelo: BNC12C

Torno CNC Hitachi Sriki Fanuc

• Fabricante: Hitachi

Torno CNC Hardinge Conquest 42

• Fabricante: Hardinge
• Modelo: CONQUEST 42

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

KLS 1220N

Characteristics: KLS 1220N | I turn over the bench: 11.8″ | Turning on the cross slide: 5.3″ | Distance between points: 19.6″ | Width of the bed: 13.8″ | Spindle nose: D1-4 | Hole through the spindle: 1.49″ | Spi...

KLS 1840N

Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

KLM 300LY

Características: KLM 300LY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 44.8 | Husillo agujero pasante: 2,95 | Chuck: 10

KLM 300SY

Características: KLM 300SY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 / 14.8 | Longitud máxima de giro: 24.2 / 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10

KVT 75E

Características: KVT 75E | Diámetro máximo de giro: 29.5 | Longitud máxima de giro: 23.6 | Diámetro máximo de vuelco: 33.4 | Nariz del husillo: A2-11

KLR 360

Características: KLR 360 | Diámetro máximo de giro: 19.7 | Longitud máxima de giro: 44.5/64/84/118 | Husillo agujero pasante: 3.97 | Chuck: 12