Nuevo Tornos Cnc

KVT 55E

KVR 320X202

Características: KVR 320X202 | Desplazamiento: 60 X 32 X 28 | Velocidad del cabezal: 8000 RPM | Cono del husillo: CT-50 | Tamaño de la mesa: 63 X 28

KLM 200SM

Características: KLM 200SM | husillo secundario: SI | Diámetro máximo de giro: 11.3 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secund...

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

HL 44

Characteristics: HL 44 | I turn over the bench: 44″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 61 ″ | Width of the bed: 24″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″ /240″ /280″ ...

HW 26

Characteristics: HW 26 | I turn over the bench: 26″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 35″ | Width of the bed: 15.75″ | Distance between points: 80″ (O 120″ / 160″) | Cross travel: 14...

ML 2060T

Characteristics: ML 2060T | I turn over the bench: 20″ | Turning on the cross slide: 14 " | I turn over the neckline: 27.5″ | Width of the bed: 12 ″ | Distance between points: 57″ | Cross travel: 12 ″ | Auxiliary...

KLS 1760II

Characteristics: KLS 1760II | I turn over the bench: 17″ | Turning on the cross slide: 10.2″ | I turn over the neckline: 22 ″ | Width of the bed: 12 - 1/4″ | Distance between points: 60″ | Cross travel: 9.26″ | A...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

KLM 300LY

Características: KLM 300LY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 44.8 | Husillo agujero pasante: 2,95 | Chuck: 10

KLM 300SY

Características: KLM 300SY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 / 14.8 | Longitud máxima de giro: 24.2 / 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10

KVT 75E

Características: KVT 75E | Diámetro máximo de giro: 29.5 | Longitud máxima de giro: 23.6 | Diámetro máximo de vuelco: 33.4 | Nariz del husillo: A2-11

KLR 360

CTL 618EVS

Characteristics: CTL 618EVS | I turn over the bench: 11″ | Turning on the cross slide: 6″ | I turn over the neckline: 9″ | Width of the bed: 6 - 3/4″ | Distance between points: 18″ | Cross travel: 6″ | Auxiliary ...