Usado system sensor

HORIBA STEC, Co., Ltd. PV Series

• Fabricante: Horiba

Flow range: 10/20 LM | Flow control range: 2 -100% F.S. | Valve type: normally open / close | Input signal: 0 - 5VDC | Responce: less than 0.5 sec. | Operating temperature: 0 - 50 °C | Operating diffential pressu...

Seismic Data Loggers Seismic Telemetry Systems Seismic Hydrophones

Firmware updates: Over-the-Air | Interface types: 4 Protocols Supported | Processing headroom: 200% Current Needs | Data bandwidth: 1Gbps Capable | Upgrade cycle: 3-5 Year Intervals | Software licensing: Flexible...

Yamato GAS410

• Fabricante: Yamato
• Modelo: GAS410

Solvent recovery system: Capacitor + freezer | Circulating gas: N2 gas (sealed circulation when connected to ADL311SA or GB-210A) | Circulating volume flow: 0.12 to 0.65m3/min | Compressor (for spraying): Linear ...

HORIBA STEC, Co., Ltd. MV-2000

• Fabricante: Horiba

Liquid material: All liquids except those corrosive to stainless steel(ex. HCl, HF) | Setting temperature: By vaporization conditions(Control Valve : Max 140 ˚C Vaporizer : Max 200 ˚C) | Leak integrity: ≤ 1 × 10-...

Best Blood Serum Electrolyte Analyzer Machine Supplier

Temperature: 5-40℃ | Relative humidity: ≤ 80 % | Atmospheric pressure: (86~106) kPa | Power supply: AC220V±22V, 50Hz±1Hz | Power: ≤120W | Dimension: 340mm*200mm*380mm | Net weight: 6Kg | Option: Sample tray | Sam...

Yamato DF832

• Fabricante: Yamato

Fan motor: Axial flow fan (capacitor motor: 20W) | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safety device: Self-diagnostic funct...

Yamato DL410

• Fabricante: Yamato
• Modelo: DL410

Water evaporation rate: Max. approx. 3,000 ml/h | Temperature control range: 40°C - 300°C at inlet | Dry air flow rate: 0.3 - 1.0 m³/min | Spraying system: Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 stan...

Yamato DH832

• Fabricante: Yamato

System: Forced air circulation and ventilation | Operating temp. range: Room temp. +15°C~300°C | Temperature fluctuation: 3.0°C (at 300°C) | Temperature slope: 18°C (at 300°C) | Temperature controller: PID contro...

Yamato DH1032

• Fabricante: Yamato

System: Forced air circulation and ventilation | Operating temp. range: Room temp. +15°C~300°C | Temperature fluctuation: 3.0°C (at 300°C) | Temperature slope: 18°C (at 300°C) | Temperature controller: PID contro...

Yamato DF1032

• Fabricante: Yamato

Fan motor: Axial flow fan (capacitor motor: 20W), Two motors used for Model 1032 | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safe...

Yamato BO400

• Fabricante: Yamato

Operating temp. range: Room temp. +10 to 180°C | Temp. control accuracy: ±2°C (at agitation) | Temp. control system: PlD control by microprocessor | Temp. setting / display method: Digital setting by ▲/▼ keys | O...

Yamato BO410

• Fabricante: Yamato

Operating temp. range: Room temp. +10 to 180°C | Temp. control accuracy: ±2°C (at agitation) | Temp. control system: PlD control by microprocessor | Temp. setting / display method: Digital setting by ▲/▼ keys | O...

Yamato ADL311-A

• Fabricante: Yamato

Temp. adjusting unit setting range: 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1deg.C | Drying air amount adjusting range: 0〜0.7m3/mi...

Yamato GB210-B

• Fabricante: Yamato

Temp. adjusting range: 40 to 220°C (inlet temperature), 0 to °60(Outlet temperature) | Temperature adjusting accuracy: Inlet temperature ± 1°C | Spraying system: Two-way nozzle, Nozzle No. 1A as standard | Drying...

Yamato ADL311S-A

• Fabricante: Yamato

Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1°C | Drying air amount adjusting range: 0 to 0.7m3/min | Sp...