Usado class c en Nagano, Prefectura de Nagano, Japón

LUX METER FT3424

Standards: DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA class | Light receiving element: Silicon photo diode | Range selection: Auto/ Manual | Linearity: ±2% rdg. (Multiply by 1.5 for display values i...

LUX METER FT3425

Standards: DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA class | Light receiving element: Silicon photo diode | Range selection: Auto/ Manual | Linearity: ±2% rdg. (Multiply by 1.5 for display values i...

POWER MEASUREMENT MODULE M7103

Compatible models: Data Logger LR8101: Standard model Data Logger LR8102: Advanced model | Operating temperature and humidity range: 0°C to 40°C (32°F to 104°F), 80% RH or less (non-condensing) | Measurement line...

AC CLAMP METER CM3291

Ac current range: 42.00 to 2000 A, 3 ranges (40 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (at 4.2 V ...

AC CLAMP METER 3280-10F

Ac current range: 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | Ac volt...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...

AC/DC CURRENT SENSOR CT6863-05

Rated current: 200 A AC/DC | Max. allowable input: 400 A rms (requires derating) | Frequency characteristics: Amplitude: DC to 500 kHz Phase: DC to 300 kHz | Amplitude and phase accuracy: DC ±0.05 % rdg. ±0.01 % ...

POWER ANALYZER PW3390

Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel | Measurement items: Frequency, RMS v...

EARTH TESTER FT6031-50

• Fabricante: HIOKI E.E

Measurement system: Two-electrode method/three-electrode method (switchable) | Measurement range: 20 Ω (0 Ω〜20.00 Ω) | Accuracy: ±1.5% rdg ±8 dgt | Earth voltage: 0〜30.0 V rms Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60...

AC FLEXIBLE CURRENT SENSOR CT7040 series

Rated measurement current: 6000 A AC | Internal measurement range: 600A AC/ 6000A AC (Range is controlled by main device) | Max. allowable input: 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires deratin...

POWER QUALITY ANALYZER PQ3100

Measurement line type: Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel CH4 for voltage/current, (all channels AC/DC measurement) | Voltage ranges: V...

AC FLEXIBLE CURRENT SENSOR CT9667

Rated input current: 5000 A AC/ 500 A AC | Max. allowable input: 10000 A continuous (45 to 66 Hz, requires derating at frequency) | Bandwidth: 10 Hz to 20 kHz (±3dB) | Amplitude and phase accuracy: ±2 % rdg. ±0.3...

POWER ANALYZER PW8001

Measurement lines: 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire | No. of pw8001 input units: Max. 8 units (mix and match) | Type of input unit: U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT...

AC CLAMP POWER METER CM3286-50

Measurement line: Single-phase, Three-phase (balanced with no distortion) | Measurement items: Voltage, Current, Voltage/Current peak, Active/Reactive/Apparent power, Power factor, Phase angle (*1), Frequency, Si...

POWER METER PW3336

Measurement lines: Single-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, (voltage / current measurement range set for each wiring mode) | Measurement items: Voltage, Current, Active power, Apparent power,...